Sumit Ghosh
Oulun yliopisto
H-index: 15
Europe-Finland
Top articles of Sumit Ghosh
Investigation of the effects of beam oscillations in electron beam welded S1100M TMCP steel
Welding in the World
2024/4/26
Stress Intensity Range Dependent Slowing Down of Fatigue Crack Growth under Strain Induced Martensitic Transformation of Film Like Retained Austenite
steel research international
2024/1/22
Effect of High-Temperature Tempering on Microstructure and Mechanical Strength of Laser-Welded Joints between Medium-Mn Stainless Steel and High-Strength Carbon Steel
Key Engineering Materials
2023/12/8
Microstructural Characteristics and Mechanical Properties of Nanostructured Bainite Processed through High and Low Temperature Ausforming and Isothermal Holding near Ms in a …
Frontiers in Materials
2019/12/10
Impact toughness of an electron-beam welded 0.2C direct-quenched and partitioned steel
Procedia Structural Integrity
2023/10/3
Surface Nanocrystallization Enhances Biomedical Performance of Additively Manufactured Stainless Steel
Journal of Materials Chemistry B
2023/9/18
Micro-mechanisms Underlying Enhanced Fatigue Life of Additively Manufactured 316L Stainless Steel with a Gradient Heterogeneous Microstructure
Materials Science and Engineering A
2023/9/4
Enhancement of Strength in Laser-Joined Al-TRIP and Si-TRIP Steels: Microstructural Insights and Deformation Analysis
Materials Science and Engineering A
2023/8/19
Micromechanical analysis and finite element modelling of laser-welded 5-mm-thick dissimilar joints between 316L stainless steel and low-alloyed ultra-high-strength steel
Materials Science and Engineering: A
2023/8/24
Rapid tempering of a medium-carbon martensitic steel: In-depth exploration of the microstructure – Mechanical property evolution
Materials & Design
2023/7/1
Simultaneous enhancement of mechanical properties and resistance to hydrogen- assisted degradation by multiple precipitation and nano-twinning in medium manganese steel
Materials Science and Engineering: A
2023/6/22
A combined 3D-atomic/nanoscale comprehension and ab initio computation of iron carbide structures tailored in Q&P steels via Si alloying
Nanoscale
2023
High-stress abrasive wear performance of medium-carbon direct-quenched and partitioned, carbide-free bainitic, and martensitic steels
Wear
2023/8/15
Dynamic softening kinetics of Al0.3CoCrFeNi high-entropy alloy during high temperature compression and its correlation with the evolving microstructure and micro-texture
Materials Characterization
2023/1/19
Nanostructured Bainite Transformation Characteristics in Medium-Carbon Steel Subjected to Ausforming and Isothermal Holding Below Martensite Start Temperature
Journal of Materials Research and Technology
2023/3/1
Micro-mechanism associated with very high cycle fatigue crack initiation of advanced DQ&P processed steel
Procedia Structural Integrity
2022/1/1
Studying the strengthening mechanisms and mechanical properties of dissimilar laser-welded butt joints of medium-Mn stainless steel and automotive high-strength carbon steel
Materials Science and Engineering: A
2022/10/20
Constitutive modeling and hot deformation processing map of a new biomaterial Ti–14Cr alloy
Journal of Materials Research and Technology
2022/9/6
Mean-stress sensitivity of an ultrahigh-strength steel under uniaxial and torsional high and very high cycle fatigue loading
Fatigue & Fracture of Engineering Materials & Structures
2022/6/27
Quantitative prediction of yield strength of highly alloyed complex steel using high energy synchrotron X-ray diffractometry
journal of materials research and technology
2022/9/1