Mahesh Somani
Oulun yliopisto
H-index: 37
Europe-Finland
Top articles of Mahesh Somani
Effect of Re addition on microstructure, properties, and performance of AlMo0. 5NbTa0. 5TiZr refractory high entropy alloy
Intermetallics
2024/5/1
Stress Intensity Range Dependent Slowing Down of Fatigue Crack Growth under Strain‐Induced Martensitic Transformation of Film‐Like Retained Austenite
steel research international
2024/1/22
Investigation of Micromechanical Properties of Martensite and Ferrite Microphases in a 35CHGSA Medium‐Si Low‐Alloy Steel
steel research international
2024/1/2
Evaluation of a processing route and microstructural characteristics for the development of ultrafine bainite in low-temperature ausformed medium-carbon steels
Journal of Materials Engineering and Performance
2023/9
Effect of heat treatment regime on microstructure and phase evolution of AlMo0. 5NbTa0. 5TiZr refractory high entropy alloy
Journal of Alloys and Compounds
2023/7/15
Abnormal Trend of Ferrite Hardening in a Medium-Si Ferrite-Martensite Dual Phase Steel
Metals
2023/3/8
Nanostructured bainite transformation characteristics in medium-carbon steel subjected to ausforming and isothermal holding below martensite start temperature
Journal of Materials Research and Technology
2023/3/1
Pentti Kaikkonen
H-Index: 2
Mahesh Somani
H-Index: 25
Dynamic softening kinetics of Al0. 3CoCrFeNi high-entropy alloy during high temperature compression and its correlation with the evolving microstructure and micro-texture
Materials Characterization
2023/3/1
Dynamic softening kinetics of Al0.3CoCrFeNi high-entropy alloy during high temperature compression and its correlation with the evolving microstructure and micro …
Materials Characterization
2023/1/19
Mahesh Somani
H-Index: 25
A combined 3D-atomic/nanoscale comprehension and ab initio computation of iron carbide structures tailored in Q&P steels via Si alloying
Nanoscale
2023
Phase stability enhancement in AlMo0. 5NbTa0. 5TiZr refractory high entropy alloy through Re addition
Journal of Alloys and Compounds
2023/12/15
Microstructural Characteristics and Mechanical Properties of Nanostructured Bainite Processed Through High and Low Temperature Ausforming and Isothermal Holding Near Ms in a …
Frontiers in Materials
2019/12/10
Effect of Nitrogen Impurity on the Tensile Ductility and Impact Toughness of Al-Bearing DQP Steels
Materials Science Forum
2023/12/1
Heterogeneous Multiphase Microstructure Formation through Partial Recrystallization of a Warm-Deformed Medium Mn Steel during High-Temperature Partitioning
Materials
2022/10/19
Characterization of hot deformation behavior of Al0. 3CoCrFeNi high-entropy alloy and development of processing map
Journal of Alloys and Compounds
2022/9/5
Simulation of the solidification and microstructural evolution in steel casting processes using the InterDendritic solidification tool
steel research international
2022/9
Mahesh Somani
H-Index: 25
Ville-Valtteri Visuri
H-Index: 8
Atomic scale characterization of carbon partitioning and transition carbide precipitation in a medium carbon steel during quenching and partitioning process
2022/7/22
Microstructures and mechanical properties of three medium-Mn steels processed via quenching and partitioning as well as austenite reversion heat treatments
Materials Science and Engineering: A
2022/7/7
Fracture toughness characteristics of thermo-mechanically rolled direct quenched and partitioned steels
Materials Science and Engineering: A
2022/4/18
Effect of Carbon Partitioning and Residual Compressive Stresses on the Lattice Strains of Retained Austenite During Quenching and Isothermal Bainitic Holding in a High‐Silicon …
steel research international
2022/4
Co-Authors
