Antti Järvenpää
Oulun yliopisto
H-index: 19
Europe-Finland
Top articles of Antti Järvenpää
Fatigue Performance and Impact Toughness of PBF-LB Manufactured AlSi 10Mg
2023/12/4
Timo Rautio
H-Index: 3
Antti Järvenpää
H-Index: 12
Fatigue Resistance Assessment of WAAM Carbon Steel
Key Engineering Materials
2024/3/15
Strengthening aluminum matrix composite with additively manufactured 316L stainless steel lattice reinforcement: Processing methodology, mechanical performance and deformation …
Journal of Materials Research and Technology
2024/3/1
Atef Hamada
H-Index: 17
Antti Järvenpää
H-Index: 12
Assessing the compressive and tensile properties of TPMS-Gyroid and stochastic Ti64 lattice structures: A study on laser powder bed fusion manufacturing for biomedical implants
Journal of Science: Advanced Materials and Devices
2024/3/1
Evaluation of Bending Fatigue Strength and Static Properties in Wire Arc Additive Manufactured Carbon Steel Bead-on-Plate Laser Weld
2024/2/16
Synergistic effects of heat treatments and severe shot peening on residual stresses and microstructure in 316L stainless steel produced by laser powder bed fusion
Journal of Materials Processing Technology
2024/2/1
Timo Rautio
H-Index: 3
Antti Järvenpää
H-Index: 12
Impact of Ultra-Flash Tempering Treatment on the Microstructure and Mechanical Properties of High-Strength Carbon Steel
Materials Science Forum
2023/12/1
Effect of Isothermal Annealing on Residual Stresses and Fatigue Properties of LPBF 316L Steel
Key Engineering Materials
2023/12/1
Antti Järvenpää
H-Index: 12
Fatigue Life and Impact Toughness of PBF-LB Manufactured Ti6Al4V and the Effect of Heat Treatment
Key Engineering Materials
2023/12/1
Residual Stresses of the Laser Welded Abrasion Resistant Steel Butt Joints
Materials Science Forum
2023/11/23
Mikko Hietala
H-Index: 3
Antti Järvenpää
H-Index: 12
Exploring the Impact of Surface Quality on the Bending Fatigue Strength of Wire Arc Additive Manufactured Carbon Steel
2023/11/10
Severe Shot Peening of PBF-LB Manufactured and Reference 316L–Fatigue Performance and Microstructure
2023/11/10
Fatigue strength and impact toughness dependence of powder bed fusion with laser beam-manufactured 316L stainless steel on orientation and layer thickness
Journal of Laser Applications
2023/11/1
Timo Rautio
H-Index: 3
Antti Järvenpää
H-Index: 12
Microstructure and Fatigue Life of Surface Modified PBF-LB Manufactured Maraging Steel
Materials Science Forum
2023/10/10
The Effect of Laser Heat Treatment and Severe Shot Peening on Laser Powder Bed Fusion Manufactured AISI 316L Stainless Steel
Materials Science Forum
2023/10/10
Effect of Severe Shot Peening on Mechanical Properties and Fatigue Resistance of Wire Arc Additive Manufactured AISI 316L
Solid State Phenomena
2023/10/6
High Temperature Heat Treatment and Severe Shot Peening of PBF-LB Manufactured 316L Stainless Steel
Solid State Phenomena
2023/8/28
Micromechanical analysis and finite element modelling of laser-welded 5-mm-thick dissimilar joints between 316L stainless steel and low-alloyed ultra-high-strength steel
Materials Science and Engineering: A
2023/8/24
Simultaneous enhancement of mechanical properties and resistance to hydrogen-assisted degradation by multiple precipitation and nano-twinning in medium manganese steel
Materials Science and Engineering: A
2023/6/22
Friction Stir Welding of Dissimilar Al 6061-T6 to AISI 316 Stainless Steel: Microstructure and Mechanical Properties
Materials
2023/5/30
Antti Järvenpää
H-Index: 12