Larry Lessard
McGill University
H-index: 48
North America-Canada
Top articles of Larry Lessard
Title | Journal | Author(s) | Publication Date |
---|---|---|---|
Experimental characterization and cyclic cohesive zone modeling of mode I delamination growth in glass/epoxy composite laminates under high cycle fatigue | Engineering Fracture Mechanics | Farhad Teimouri Mohammad Heidari-Rarani Farhad Haji Aboutalebi Saeid Karimi Larry Lessard | 2024/2/9 |
Tip clearance influence on hydrodynamic performance and pressure fluctuation of a composite ducted propeller using a two-way FSI method | Ocean Engineering | Xiaoyi An Peng Wang Min Ye Ruixuan He Chengshan Li | 2023/8/15 |
Proposed holistic strategy for mechanical recycling of wind turbine blades for 3D printing and compression molding | IOP Conference Series: Materials Science and Engineering | Larry Lessard Zhengshu Yan Javad Nasiry | 2023/11/1 |
3D printed wood-fiber reinforced architected cellular composite beams with engineered flexural properties | Additive Manufacturing | Ehsan Estakhrianhaghighi Armin Mirabolghasemi Larry Lessard Abdolhamid Akbarzadeh | 2023/9/25 |
A finite element model for 3D printed recycled parts from end-of-life wind turbine blades | Composite Structures | Zhengshu Yan Amirmohammad Rahimizadeh Yixue Zhang Yuheng Zhou Larry Lessard | 2023/9/15 |
Injectable, pore‐forming, perfusable double‐network hydrogels resilient to extreme biomechanical stimulations | Advanced Science | Sareh Taheri Guangyu Bao Zixin He Sepideh Mohammadi Hossein Ravanbakhsh | 2022/1 |
Effect of lamina fiber orientation interfaced with semi-flexible adhesive layer on strength and failure mode of composite single-lap joints | International Journal of Adhesion and Adhesives | Ali Sadeghi Rasoul Mahshid Mohammad Heidari-Rarani Larry Lessard | 2022/10/1 |
A novel flax fibre composite material for stringed instrument fingerboards | Journal of Reinforced Plastics and Composites | Olivier Chabot Larry Lessard Martine Dubé | 2022/9 |
Architected cellular fiber-reinforced composite | Composites Part B: Engineering | E Estakhrianhaghighi A Mirabolghasemi J Shi L Lessard AH Akbarzadeh | 2022/6/1 |
Polylactic acid/recycled wind turbine glass fiber composites with enhanced mechanical properties and toughness | Journal of Applied Polymer Science | Amirhosein Moslehi Abdellah Ajji Marie‐Claude Heuzey Amirmohammad Rahimizadeh Larry Lessard | 2022/4/15 |
Engineering toughening mechanisms in architectured ceramic-based bioinspired materials | Materials & Design | A Rahimizadeh H Yazdani Sarvestani L Li J Barroeta Robles D Backman | 2021/1/15 |
A parametric study on static behavior and load sharing of multi-bolt hybrid bonded/bolted composite joints | Composites Part B: Engineering | Valentin S Romanov Mohammad Heidari-Rarani Larry Lessard | 2021/7/15 |
A novel conservative failure model for the fused deposition modeling of polylactic acid specimens | Additive Manufacturing | Arash Rahmati Mohammad Heidari-Rarani Larry Lessard | 2021/12/1 |
An experimental study on the mechanical behaviour of bonded and hybrid bonded-bolted composite joints using digital image correlation (DIC) technique | Composite Structures | JiHyun Kim Pedro Lopez-Cruz Mohammad Heidari-Rarani Larry Lessard Jeremy Laliberté | 2021/11/15 |
Mechanical and thermal study of 3D printing composite filaments from wind turbine waste | Polymer Composites | Amirmohammad Rahimizadeh Jordan Kalman Kazem Fayazbakhsh Larry Lessard | 2021 |
Experimental investigation of the effect of half gap/half overlap defects on the strength of composite structures fabricated using automated fibre placement (AFP) | Composites Part A: Applied Science and Manufacturing | D Del Rossi V Cadran P Thakur M Palardy-Sim M Lapalme | 2021/11/1 |
Effect of adhesive layer compliance on strength of single-lap hybrid bonded-bolted joints | Composite Structures | Kobyé Bodjona Sean Fielding Mohammad Heidari-Rarani Larry Lessard | 2021/3/1 |
Recycling and valorization of glass fibre thermoset composite waste by cold incorporation into a sustainable inorganic polymer matrix | Composites Part B: Engineering | Yixue Zhang Yiannis Pontikes Larry Lessard Aart Willem van Vuure | 2021/10/15 |
An overview of additive manufacturing technologies for musical wind instruments | Abbas Razavykia Eugenio Brusa Cristiana Delprete Reza Yavari | 2020/9/3 | |
Experimental and analytical investigation of 3D printed specimens reinforced by different forms of recyclates from wind turbine waste | Polymer Composites | Mazin Tahir Amirmohammad Rahimizadeh Jordan Kalman Kazem Fayazbakhsh Larry Lessard | 2021/6/11 |