Seoksu Moon
Inha University
H-index: 27
Asia-South Korea
Top articles of Seoksu Moon
Title | Journal | Author(s) | Publication Date |
|---|---|---|---|
Near-field plume-to-plume interaction of multi-hole GDI injector under elevated ambient density conditions | International Journal of Multiphase Flow | Gyuhan Bae Seoksu Moon | 2024/1/1 |
Correlating armature and needle dynamics with voltage waveforms of solenoid-actuated GDI injector | Flow Measurement and Instrumentation | Seoksu Moon Omer Faruk Atac Gyuhan Bae Heechang Oh | 2023/8/1 |
Detecting ultrafast turbulent oscillations in near-nozzle discharged liquid jet using x-ray phase-contrast imaging with MHz frequency | Physics of Fluids | Omer Faruk Atac Hyunsu Lee Seoksu Moon | 2023/4/1 |
Comprehensive investigation on ballistic injection characteristics of GDI injector: A particular focus on injection pressure and fuel effects | Fuel | Seoksu Moon Omer Faruk Atac Gyuhan Bae Jeonghwan Park | 2023/3/1 |
Application of high-frequency water injection for the performance improvement of waste-heat-recovery boilers | International Communications in Heat and Mass Transfer | Gregory Peck Jaehun Shin Seoksu Moon | 2023/11/1 |
Theoretical and experimental study of waste-heat-recovery boiler with water injection | Heliyon | Jaehun Shin Taejoon Park Hyunseok Cho Junsang Yoo Seoksu Moon | 2023/9/1 |
Hydraulic flip in a gasoline direct injection injector and its effect on injected spray | Fuel | Raditya Hendra Pratama Weidi Huang Seoksu Moon Jin Wang Kei Murayama | 2022/2/15 |
1-D Modeling of Heater Surface Temperature Distribution in EHC-based Urea-SCR System | Journal of ILASS-Korea | Sunhong Park Jihyun Son Seoksu Moon Kwangchul Oh Sungwook Jang | 2022 |
Hole number effect on internal and discharged flow characteristics of diesel injector during transient operation | Flow Measurement and Instrumentation | Omer Faruk Atac Seoksu Moon Weidi Huang Daisuke Ozawa | 2022/12/1 |
Development of simplified model for injection rate prediction of diesel injectors during transient and steady operation | Fuel | Omer Faruk Atac Sanggwon Lee Seoksu Moon | 2022/9/15 |
Simplified Modeling and Analysis of Surface Temperature Distribution in Electrically Heated Catalyst for Diesel Urea-SCR Systems | Energies | Seoksu Moon Sunhong Park Jihyun Son Kwangchul Oh Sungwook Jang | 2022/9/1 |
Unveiling needle lift dependence on near-nozzle spray dynamics of diesel injector | Fuel | Raditya Hendra Pratama Weidi Huang Seoksu Moon | 2021/2/1 |
Preliminary study to validate practicality of heat recovery boilers with water spray (HR-B/WS) | Transactions of the Korean Society of Mechanical Engineers, B | Jun Sun Seo Chang Eon Lee Tae Joon Park Seok Su Moon Hyoung Rae Kim | 2021 |
Establishing the Models for Optimized Design of Water Injection in Boilers with Waste-heat-recovery System | Journal of ILASS-Korea | Jaehun Shin Seoksu Moon | 2021 |
Experimental investigation of fuel temperature effects on transient needle motion and injection velocity of solenoid type diesel injector | International Journal of Heat and Mass Transfer | Gyuhan Bae Sungsik Choi Sanggwon Lee Seoksu Moon Jin Wang | 2021/12/1 |
Nozzle tip wetting in GDI injector at flash-boiling conditions | International Journal of Heat and Mass Transfer | Weidi Huang Huifeng Gong Seoksu Moon Jin Wang Kei Murayama | 2021/4/1 |
Unraveling the initial flash boiling spray formation at the same superheated index achieved by altering ambient pressure and fuel temperature independently | International Journal of Heat and Mass Transfer | Omer Faruk Atac Seoksu Moon Jeeyeon Jeon | 2021/4/1 |
Nozzle tip wetting in gasoline direct injection injector and its link with nozzle internal flow | International Journal of Engine Research | Weidi Huang Seoksu Moon Jin Wang Kei Murayama Toshiyuki Arima | 2020/2 |
Development of a Lightweight Prediction Model of Fuel Injection Rates from High Pressure Fuel Injectors | Journal of ILASS-Korea | Sanggwon Lee Gyuhan Bae Omer Faruk Atac Seoksu Moon Jinsuk Kang | 2020 |
X-ray high speed visualization and measurement of cavitation flow in a nozzle under transient injection condition | Kazuya Kotani Rubby Prasetya Ayumi Nishihara Takashi Miwa Akira Sou | 2020 |
