S. A. B. Al Omari
United Arab Emirates University
H-index: 20
Asia-United Arab Emirates
Top articles of S. A. B. Al Omari
Title | Journal | Author(s) | Publication Date |
---|---|---|---|
Enhanced pursuance of dye-sensitized solar cell for indoor and outdoor stability using reduced graphene oxide@ Mn2O3 nanocomposite | Carbon Letters | B Arjun Kumar G Ramalingam Salah Addin Burhan Al Omari Nanda Kumar Reddy Nallabala P Sakthivel | 2023/12/9 |
Heat sink with opposed elements providing temperature gradient | 2024/2/29 | ||
Efficient processed carbon Soot@ MoS2 hybrid Bi-functional electrode for dye-sensitized solar cell and asymmetric supercapacitor devices | Nano Materials Science | B Arjun Kumar Gopal Ramalingam Salah Addin Burhan Al Omari Zhumabay Bakenov Sambasivam Sangaraju | 2024/1/12 |
Experimental investigation of spark timing on extension of hydrogen knock limit and performance of a hydrogen-gasoline dual-fuel engine | International Journal of Hydrogen Energy | STP Purayil SAB Al-Omari E Elnajjar | 2024/1/2 |
Experimental investigation of the effect of CO2 dilution on the performance and hydrogen knock limit of a hydrogen–gasoline dual fuel spark ignition engine 1 | International Journal of Hydrogen Energy | STP Purayil SAB Al-Omari E Elnajjar | 2024/5/28 |
Redox-active pigeon excreta mediated metal oxides nanosheets for enhancing co-catalyst for photovoltaic performance in dye-sensitized solar cells | Journal of Materials Research and Technology | D Karthigaimuthu B Arjun Kumar T Elangovan Gopal Ramalingam Sujith Kalluri | 2023/11/1 |
A comparison of oscillating sweeping jet and steady normal jet in cooling gas turbine leading edge: Numerical analysis | International Journal of Heat and Mass Transfer | Mohammed S Khan Mohammad O Hamdan Salah AB Al-Omari Emad Elnajjar | 2023/7/1 |
The impact of different fin configurations and design parameters on the performance of a finned PCM heat sink | International Journal of Thermofluids | Salah Addin Burhan Al-Omari Farooq Mahmoud Zahid Ahmed Qureshi Emad Elnajjar | 2023/11/1 |
Architected lattices embedded with phase change materials for thermal management of high-power electronics: A numerical study | Applied Thermal Engineering | Zahid Ahmed Qureshi Salah Addin Burhan Al-Omari Emad Elnajjar Oraib Al-Ketan Rashid Abu Al-Rub | 2023/1/25 |
Numerical analysis and experimental validation of the jet impingement cooling of a turbine-blade leading edge at different rotation speeds | International Journal of Numerical Methods for Heat & Fluid Flow | Zbigniew Buliński Andrzej J Nowak | 2008/5/22 |
A numerical analysis investigation to optimize the performance of the Ranque–Hilsch Vortex tube by changing the internal tapering angle | International Journal of Thermofluids | Muneer Sungur Emad Elnajjar Mohammad O Hamdan Salah AB Al-Omari | 2023/11/1 |
Effect of hydrogen blending on the combustion performance, emission, and cycle-to-cycle variation characteristics of a single-cylinder GDI spark ignition dual-fuel engine | International Journal of Thermofluids | STP Purayil SAB Al-Omari E Elnajjar | 2023/11/1 |
Review of hydrogen–gasoline SI dual fuel engines: Engine performance and emission | STP Purayil Mohammad O Hamdan SAB Al-Omari MYE Selim E Elnajjar | 2023/12/1 | |
Heat sinks with vibration enhanced heat transfer | 2023/8/22 | ||
On the effect of porosity and functional grading of 3D printable triply periodic minimal surface (TPMS) based architected lattices embedded with a phase change material | International Journal of Heat and Mass Transfer | Zahid Ahmed Qureshi Salah Addin Burhan Al-Omari Emad Elnajjar Oraib Al-Ketan Rashid Abu Al-Rub | 2022/2/1 |
A Heat Sink Integrating Fins within High Thermal Conductivity Phase Change Material (PCM) to Cool High Heat-flux Heat Sources | International Journal of Thermal Sciences | Mahmoud Farooq Salah Al-Omari Zahid Qureshi Emad Elnajjar | 2022 |
CI engine performance and emissions with waste cooking oil biodiesel boosted with hydrogen supplement under different load and engine parameters | Alexandria Engineering Journal | E Elnajjar SAB Al-Omari MYE Selim STP Purayil | 2022/6/1 |
Thermal management characteristics of a counter-intuitive finned heat sink incorporating detached fins impregnated with a high thermal conductivity-low melting point PCM | International Journal of Thermal Sciences | Salah Addin Burhan Al-Omari Zahid Ahmed Qureshi Farooq Mahmoud Emad Elnajjar | 2022/5/1 |
Nature-inspired triply periodic minimal surface-based structures in sheet and solid configurations for performance enhancement of a low-thermal-conductivity phase-change … | International Journal of Thermal Sciences | Zahid Ahmed Qureshi Salah Addin Burhan Al-Omari Emad Elnajjar Oraib Al-Ketan Rashid Abu Al-Rub | 2022/3 |
Thermal characterization of 3D-Printed lattices based on triply periodic minimal surfaces embedded with organic phase change material | Case Studies in Thermal Engineering | Zahid Ahmed Qureshi Salah Addin Burhan Al Omari Emad Elnajjar Farooq Mahmoud Oraib Al-Ketan | 2021/10/1 |