Reza Esmaeilizadeh
University of Waterloo
H-index: 16
North America-Canada
Top articles of Reza Esmaeilizadeh
Title | Journal | Author(s) | Publication Date |
---|---|---|---|
Defect detection in additively manufactured AlSi10Mg and Ti6Al4V samples using laser ultrasonics and phase shift migration | Ultrasonics | A Martinez-Marchese R Esmaeilizadeh E Toyserkani | 2024/5/1 |
Investigating the deformation and microstructural evolution of laser powder-bed fusion of Hastelloy X during high temperature fatigue loading | Additive Manufacturing Letters | Reza Esmaeilizadeh Xiaolong Li Mathias Kuhlow Stuart Holdsworth Ali Keshavarzkermani | 2024/4/1 |
Effects of temperature and strain rate on tensile properties and dynamic strain aging behaviour of LPBF Hastelloy X | Additive Manufacturing Letters | X Li R Esmaeilizadeh H Jahed E Toysarkani MS Pham | 2023/2/1 |
On the Processability and Microstructural Evolution of CuCrZr in Multilayer Laser-Directed Energy Deposition Additive Manufacturing via Statistical and Experimental Methods | Journal of Manufacturing and Materials Processing | Ali Zardoshtian Reza Esmaeilizadeh Mazyar Ansari Mohsen K Keshavarz Hamid Jahed | 2023/8/18 |
Laser-directed energy deposition of CuCrZr alloy: From statistical process parameter optimization to microstructural analysis | The International Journal of Advanced Manufacturing Technology | Ali Zardoshtian Mazyar Ansari Reza Esmaeilzadeh Ali Keshavarzkermani Hamid Jahed | 2023/6 |
A state-of-the-art review on fatigue performance of powder bed fusion-built alloy 718 | Esmaeil Sadeghi Paria Karimi Reza Esmaeilizadeh Filippo Berto Shuai Shao | 2023/3 | |
Additively manufactured metallic biomaterials | Elham Davoodi Hossein Montazerian Anooshe Sadat Mirhakimi Masoud Zhianmanesh Osezua Ibhadode | 2022/9/1 | |
Analytical modeling of multi-track powder-fed laser directed energy deposition: on the relationships among process, deposition dimensions, and solidification microstructure in … | Journal of Materials Processing Technology | M Ansari A Martinez-Marchese M Khamooshi A Keshavarzkermani R Esmaeilizadeh | 2022/8/1 |
Fatigue characterization and modeling of additively manufactured hastelloy-x superalloy | Journal of Materials Engineering and Performance | Reza Esmaeilizadeh Ali Keshavarzkermani Sasan Faghih Behzad Behravesh Usman Ali | 2022/8 |
On the effect of thin-wall thickness on melt pool dimensions in laser powder-bed fusion of Hastelloy X: Numerical modeling and experimental validation | Journal of Manufacturing Processes | Shahriar Imani Shahabad Usman Ali Zhidong Zhang Ali Keshavarzkermani Reza Esmaeilizadeh | 2022/3/1 |
Influence of Pore Formation and Its Role on the Tensile Properties of 17-4 PH Stainless Steel Fabricated by Laser Powder Bed Fusion | Dyuti Sarker Usman Ali Farid Ahmed Reza Esmaeilizadeh Ali Keshavarzkermani | 2021 | |
Columnar-to-equiaxed grain transition in powder bed fusion via mimicking casting solidification and promoting in situ recrystallization | Additive Manufacturing | Paria Karimi Esmaeil Sadeghi Joakim Ålgårdh Ali Keshavarzkermani Reza Esmaeilizadeh | 2021/10/1 |
Additively manufactured gradient porous Ti–6Al–4V hip replacement implants embedded with cell-laden gelatin methacryloyl hydrogels | ACS applied materials & interfaces | Elham Davoodi Hossein Montazerian Reza Esmaeilizadeh Ali Ch Darabi Armin Rashidi | 2021/5/4 |
Characterization and Modelling of Additively Manufactured Hastelloy X Parts under Quasi-Static and Cyclic Loading | Reza Esmaeilizadeh | 2021/4/28 | |
Static recrystallization impact on grain structure and mechanical properties of heat-treated Hastelloy X produced via laser powder-bed fusion | Materials Characterization | Ali Keshavarzkermani Reza Esmaeilizadeh Pablo D Enrique Hamed Asgari Norman Y Zhou | 2021/3/1 |
On the effect of laser powder-bed fusion process parameters on quasi-static and fatigue behaviour of Hastelloy X: A microstructure/defect interaction study | Additive Manufacturing | Reza Esmaeilizadeh Ali Keshavarzkermani Usman Ali Behzad Behravesh Ali Bonakdar | 2021/2/1 |
Enhancing fatigue life of additive manufactured parts with electrospark deposition post-processing | Additive Manufacturing | Pablo D Enrique Ali Keshavarzkermani Reza Esmaeilizadeh Stephen Peterkin Hamid Jahed | 2020/12/1 |
Heat source model calibration for thermal analysis of laser powder-bed fusion | The International Journal of Advanced Manufacturing Technology | Shahriar Imani Shahabad Zhidong Zhang Ali Keshavarzkermani Usman Ali Yahya Mahmoodkhani | 2020/2 |
Microstructure and oxidation behavior of NiCr-chromium carbides coating prepared by powder-fed laser cladding on titanium aluminide substrate | Ceramics International | SE Aghili M Shamanian R Amini Najafabadi A Keshavarzkermani R Esmaeilizadeh | 2020/2/1 |
Customizing mechanical properties of additively manufactured Hastelloy X parts by adjusting laser scanning speed | Journal of Alloys and Compounds | Reza Esmaeilizadeh Ali Keshavarzkermani Usman Ali Yahya Mahmoodkhani Behzad Behravesh | 2020/1/5 |