Paul A Hooper
Imperial College London
H-index: 31
Europe-United Kingdom
Top articles of Paul A Hooper
Title | Journal | Author(s) | Publication Date |
|---|---|---|---|
Quantifying The Influence of SEN (B) Sample Thickness and Constraint on The Fracture Toughness of Pressure Vessel Steel SA508 | Procedia Structural Integrity | Ben MB Sargeant Paul A Hooper Catrin M Davies | 2024/1/1 |
In-situ Anomaly Detection in Additive Manufacturing with Graph Neural Networks | arXiv preprint arXiv:2305.02695 | Sebastian Larsen Paul A Hooper | 2023/5/4 |
A Study on the Bending of Laminated Glass Under Blast Loading | Experimental Mechanics | MA Samieian D Cormie D Smith W Wholey BRK Blackman | 2023/3 |
Strain rate dependence of single crystal tantalum | AIP Conference Proceedings | Mark Collinson Glenn Whiteman Jeremy Millett Michael Cox Robert Quinn | 2023/9/26 |
High Strain-Rate Characterisation of Vanadium | Journal of Dynamic Behavior of Materials | G Whiteman LJ Lea RM Quinn MJ Cox PA Hooper | 2023/9 |
Ductile Damage Model Development and Validation of 316L Laser Powder Bed Fusion Steel Under Multiaxial Stress Conditions | Theo Hales Tobias Rønneberg Paul Hooper Catrin Mair Davies | 2022/7/17 | |
Deep semi-supervised learning of dynamics for anomaly detection in laser powder bed fusion | Journal of Intelligent Manufacturing | Sebastian Larsen Paul A Hooper | 2022/2 |
Localised porosity detection in laser powder bed fusion using in-situ monitoring | Available at SSRN 4255024 | Richard J Williams Harry de Winton Vincent Fernandez Paul A Hooper | 2022 |
Process parameter sensitivity of the energy absorbing properties of additively manufactured metallic cellular materials | Materials & Design | Marlini Simoes JA Harris S Ghouse PA Hooper GJ McShane | 2022/12/1 |
Multi-sensor measurement for in-situ defect identification in metal laser powder bed fusion | Afaf Remani Richard Williams Arianna Rossi Fernando Peña Adam Thompson | 2022 | |
Influence of laser shock peening on the residual stresses in additively manufactured 316L by Laser Powder Bed Fusion: A combined experimental–numerical study | Additive Manufacturing | Paul Sandmann Sören Keller Nikolai Kashaev Shaaz Ghouse Paul A Hooper | 2022/12/1 |
Characterisation of single crystal Ta with respect to strain rate | APS Shock Compression of Condensed Matter Meeting Abstracts | Mark Collinson Glenn Whiteman Jeremy Millett Michael Cox Robert Quinn | 2022 |
Multi phenomena melt pool sensor data fusion for enhanced process monitoring of laser powder bed fusion additive manufacturing | Materials & Design | Aniruddha Gaikwad Richard J Williams Harry de Winton Benjamin D Bevans Ziyad Smoqi | 2022/9/1 |
A method for objectively evaluating the defect detection performance of in-situ monitoring systems | Additive Manufacturing | Henry C de Winton Frederic Cegla Paul A Hooper | 2021/12/1 |
The effects of hot forging on the preform additive manufactured 316 stainless steel parts | Micron | Christopher Hopper Catalin I Pruncu Paul A Hooper Zinong Tan Shang-Te Yang | 2021/4/1 |
In situ monitoring of the layer height in laser powder bed fusion | Material Design & Processing Communications | Richard J Williams Catrin M Davies Paul A Hooper | 2020 |
Creep deformation and failure properties of 316 L stainless steel manufactured by laser powder bed fusion under multiaxial loading conditions | Additive Manufacturing | Richard J Williams Jalal Al-Lami Paul A Hooper Minh-Son Pham Catrin M Davies | 2021/1/1 |
Design of a multi-sensor measurement system for in-situ defect identification in metal additive manufacturing | Proc ASPE/euspen Advancing Precis in Addit Manuf | Afaf Remani Richard Williams Adam Thompson John Dardis Nick Jones | 2021/9 |
The influence of microstructural anisotropy on the hot deformation of wire arc additive manufactured (WAAM) Inconel 718 | Materials Science and Engineering: A | Bo Lan Yaping Wang Yuehan Liu Paul Hooper Christopher Hopper | 2021/8/17 |
Thermal modeling in metal additive manufacturing using graph theory–Application to laser powder bed fusion of a large volume impeller | Additive Manufacturing | Reza Yavari Richard Williams Alex Riensche Paul A Hooper Kevin D Cole | 2021/5/1 |
Co-Authors
