Norfazillah Talib
Universiti Tun Hussein Onn Malaysia
H-index: 13
Asia-Malaysia
Top articles of Norfazillah Talib
Title | Journal | Author(s) | Publication Date |
|---|---|---|---|
The Investigation of Material Removal Rate on Electrical Discharge Machining of Titanium Alloys (Ti-6Al-4V) at Different Peak Currents and Pulse Durations by Using RBD Palm Oil … | Journal of Advanced Research in Applied Mechanics | Said Ahmad Aiman Supawi Norfazillah Talib Lee Woon Kiow Ho Fu Haw | 2024/3/22 |
Performance investigation of graphene based-nanofluids as a metalworking fluid for turning process | AIP Conference Proceedings | Norfazillah Talib MKE Azmi Nor Athira Jamaluddin Woon Kiow Lee Haslina Abdullah | 2024/3/21 |
Physical Characterization of Modified Palm Oil with Hybrid Additives Nanofluids | Journal of Advanced Research in Micro and Nano Engineering | Ainaa Mardhiah Sabri Norfazillah Talib Zulkhairul Abdul Karim Amiril Sahab Abdul Sani Kamaruddin Kamdani | 2024/2/7 |
The Impact of Heating Temperature and Flux Ratio on the In-Situ Casting Technique as a Direct Recycling of AlSi7Mg Machining Chips | Journal of Advanced Research in Micro and Nano Engineering | Ain Zubaidah Samian Aslinda Saleh Nazreen James Nazri Norfazillah Talib Haslina Abdullah | 2024/2/7 |
Tribological performance of novel modified Calophyllum Inophyllum nano-fluid from Pahang, Malaysia | Jurnal Tribologi | Amiril Sahab Abdul Sani Zubaidah Zamri Radhiyah Abd Aziz Ainaa Mardhiah Sabri Norfazillah Talib | 2024 |
Preface: 11th International Conference on Mechanical and Manufacturing Engineering 2021 | Mohammad Ali Md Abdus Salam Akanda AKM Monjur Morshed | 2016/7/12 | |
Study of Primary Stability of Hip Implant for Semi Hip Replacement by Using Finite Element Analysis | Haslina Abdullah Mohamad Shukri Zakaria Norfazillah Talib | 2023/2/14 | |
Electrode Wear Rate of RBD Palm Oil as Dielectric Fluids on Electrical Discharge Machining (EDM) at Different Peak Current and Pulse Duration of Titanium Alloys | Journal of Advanced Research in Fluid Mechanics and Thermal Sciences | Aiman Supawi Said Ahmad Norfazillah Talib Lee Woon Kiow Ho Fu Haw | 2023/12/31 |
The influence of hBN particles in modified Jatropha-based oil as a metalworking fluid on tool life and tool wear during turning process | AIP Conference Proceedings | N Talib WK Lee H Abdullah S Ahmad A Saleh | 2023/5/22 |
Physical Properties of New Formulation of Hybrid Nanofluid-based Minimum Quantity Lubrication (MQL) from Modified Jatropha Oil as Metalworking Fluid | Journal of Advanced Research in Fluid Mechanics and Thermal Sciences | Ainaa Mardhiah Sabri Norfazillah Talib Nur Syazwani Filzah Mohd Saad Amiril Sahab Abdul Sani Sandip Kunar | 2023/1/15 |
Orthogonal Cutting Performance of Vegetable-Based Lubricants via Minimum Quantity Lubrication Technique on AISI 316L | Amiril Sahab Abdul Sani Zubaidah Zamri Shahandzir Baharom Mugilan Ganesan Norfazillah Talib | 2024/3/18 | |
The effect of differential pitch angle and margin on surface integrity when end milling titanium alloy | AIP Conference Proceedings | H Rachmat AK Wafi EA Rahim K Kamdani N Talib | 2023/5/22 |
Sustainable Electrical Discharge Machining (EDM) Of Inconel 718 When Using RBD Palm Oil Based Dielectric Fluid | Journal of Sustainable Manufacturing in Transportation | Said Ahmad Vellmurugan Mohan Mohd Amri Lajis Fu Haw Ho Lee Woon Kiow | 2023 |
The Tribological Performance of Nano-Activated Carbon as Solid Additives in Modified Calophyllum Inophyllum Based-Metalworking Fluid | Zubaidah Zamri Amiril Sahab Abdul Sani Radhiyah Abd Aziz Ainaa Mardhiah Sabri Norfazillah Talib | 2023/8/7 | |
The performance of thermosetting plastic waste reinforced sustainable brick | AIP Conference Proceedings | Said Ahmad Muhammad Zol Fikri Zolkefli Mohd Amri Lajis Ho Fu Haw Norfazillah Talib | 2023/5/22 |
Evaluation of physicochemical and tribological performances of hBN/WS2 and hBN/TiO2 hybrid nanoparticles-MJO-based oil | Jurnal Tribologi | Ainaa Mardhiah Sabri Norfazillah Talib Amiril Sahab Abdul Sani Kamaruddin Kamdani | 2023 |
Overview of Hybrid Micromachining and Microfabrication Techniques | Hybrid Micromachining and Microfabrication Technologies: Principles, Varieties and Applications | Sandip Kunar Akhilesh Kumar Singh Devarapalli Raviteja Golam Kibria Prasenjit Chatterjee | 2023/6/23 |
Review on non-edible oil based as metalworking fluid for machining purposes-Calophyllum Inophyllum | Ainaa Mardhiah Sabri Norfazillah Talib Amiril Sahab Abdul Sani | 2023/5/22 | |
Modified Tamanu Plant-Based Oil From Pahang Malaysia as Biodegradable Metalworking Fluids | Materials Today: Proceedings | Amiril Sahab Abdul Sani Zubaidah Zamri Puteri Humairah Megat Ahmad Radzi Ainaa Mardhiah Sabri Norfazillah Talib | 2023/1/1 |
Laser‐Assisted Electrochemical Discharge Micromachining | Hybrid Micromachining and Microfabrication Technologies: Principles, Varieties and Applications | Sandip Kunar Kagithapu Rajendra VVD Praveen Kalepu Prasenjit Chatterjee Asma Perveen | 2023/6/23 |
