Nicolas Saintier
Arts et Métiers ParisTech
H-index: 37
Europe-France
Top articles of Nicolas Saintier
Title | Journal | Author(s) | Publication Date |
|---|---|---|---|
Multiscale study of additively manufactured 316 L microstructure sensitivity to heat treatment over a wide temperature range | Materials Characterization | Hugo Roirand Alessandro Pugliara Benoit Malard Anis Hor Nicolas Saintier | 2024/2/1 |
Micro-mechanisms and modelling of the corrosion fatigue behaviour of a maraging steel | Corrosion Science | Camille Rousseau Mohamed El May Nicolas Saintier Abdelali Oudriss Xavier Feaugas | 2024/2/1 |
Defect sensitivity in L-PBF AlSi7Mg0. 6 alloy subjected to fatigue load: Effect of load ratio and torsion loading | International Journal of Fatigue | M Bonneric C Brugger B Tranchand A Castro Moreno J Lesseur | 2024/4/1 |
The combined effects of a heterogeneous porosity distribution and stress gradient on the high cycle fatigue behavior of high pressure die cast AlSi9Cu3 | International Journal of Fatigue | Thomas Landron Franck Morel Nicolas Saintier Viet Duc Le Daniel Bellett | 2024/2/16 |
Effect of chemical ageing on fatigue life of short glass fiber-reinforced Polyamide 6, 6 | Polymer Degradation and Stability | S Lottier S Tencé-Girault L Gervat N Saintier G Miquelard-Garnier | 2023/2/1 |
Effect of laser‐scan strategy on microstructure and fatigue properties of 316L additively manufactured stainless steel | Fatigue & Fracture of Engineering Materials & Structures | Hugo Roirand Anis Hor Benoit Malard Nicolas Saintier | 2023/1 |
Statistical study of the size and spatial distribution of defects in a cast aluminium alloy for the low fatigue life assessment | International Journal of Fatigue | Pablo Wilson Nicolas Saintier Thierry Palin-Luc Bruno Sudret Sebastien Bergamo | 2023/1/1 |
Effect of laser scan pattern in laser powder bed fusion process: the case of 316L stainless steel | Procedia Structural Integrity | Hugo Roirand Benoit Malard Anis Hor Nicolas Saintier | 2022/1/1 |
Internal fatigue crack monitoring during ultrasonic fatigue test using temperature measurements and tomography | Mechanics of Materials | Nicolas Ranc Alexandre Messager Arnaud Junet Thierry Palin-Luc Jean-Yves Buffière | 2022/11/1 |
Topography and wettability characterization of surfaces manufactured by SLM and treated by chemical etching | Mechanics of Advanced Materials and Structures | Thomas Thenard Anita Catapano Rachele Allena M El May Nicolas Saintier | 2022/5/3 |
Ti-6Al-4V lattices obtained by SLM: characterisation of the heterogeneous high cycle fatigue behaviour of thin walls. | Procedia Structural Integrity | Marie Pirotais Nicolas Saintier Charles Brugger Vincent Conesa | 2022/1/1 |
Scatter and size effect in High Cycle Fatigue of cast aluminum-silicon alloys: A comprehensive experimental investigation | Procedia Structural Integrity | Driss El Khoukhi Franck Morel Nicolas Saintier Daniel Bellett Pierre Osmond | 2022/1/1 |
Contribution of the introduction of artificial defects by additive manufacturing to the determination of the Kitagawa diagram of Al-Si alloys | Procedia Structural Integrity | Matthieu Bonneric Charles Brugger Nicolas Saintier A Castro Moreno B Tranchand | 2022/1/1 |
Spatial point pattern methodology for the study of pores 3D patterning in two casting aluminium alloys | Materials Characterization | Driss El Khoukhi Nicolas Saintier Franck Morel Daniel Bellett Pierre Osmond | 2021/7/1 |
Probabilistic modeling of the size effect and scatter in High Cycle Fatigue using a Monte-Carlo approach: Role of the defect population in cast aluminum alloys | international Journal of Fatigue | Driss El Khoukhi Franck Morel Nicolas Saintier Daniel Bellett Pierre Osmond | 2021/6/1 |
Influence of the position and size of various deterministic defects on the high cycle fatigue resistance of a 316L steel manufactured by laser powder bed fusion | International journal of fatigue | Olivier Andreau Etienne Pessard Imade Koutiri Patrice Peyre Nicolas Saintier | 2021/2/1 |
Quasi-static and fatigue properties of graded Ti–6Al–4V lattices produced by Laser Powder Bed Fusion (LPBF) | Additive Manufacturing | Nicolas Soro Nicolas Saintier Jonathan Merzeau Martin Veidt Matthew S Dargusch | 2021/1/1 |
Effect of aging treatment on apparent hydrogen solubility and trapping in a new generation maraging steel | Scripta Materialia | Camille Rousseau Abdelali Oudriss Remy Milet Xavier Feaugas Mohamed El May | 2020/7/1 |
Determination of the effective elastic properties of titanium lattice structures | Mechanics of Advanced Materials and Structures | Khalil Refai Marco Montemurro Charles Brugger Nicolas Saintier | 2020/12/1 |
Effect of hot isostatic pressing on the critical defect size distribution in AlSi7Mg0. 6 alloy obtained by selective laser melting | International Journal of Fatigue | Matthieu Bonneric Charles Brugger Nicolas Saintier | 2020/11/1 |
