N. Jeyaprakash
National Taipei University of Technology
H-index: 17
Asia-Taiwan
Top articles of N. Jeyaprakash
Title | Journal | Author(s) | Publication Date |
|---|---|---|---|
Nondestructive characterization of elastic modulus under different tensile stresses through laser ultrasound combined inversion technique | International Journal of Modern Physics B | Nguyen Le Van N Jeyaprakash Che-Hua Yang | 2024/2/10 |
Physical simulation of the heat-affected zone in nickel-free high-nitrogen stainless steel weld at various peak temperatures and cooling rates | Materials Today Communications | R Dhanasekar T Satish Kumar K Krishna Kumar N Jeyaprakash | 2024/3/1 |
Performance Analysis of Different Dielectric on Electrical Discharge Machined AA8011/SiC/Si3N4 Composites using Taguchi Coupled ELECTRE Approach | Silicon | D Gunasekar KR Thangadurai K Lenin D Raj Kumar N Jeyaprakash | 2024/2 |
Synergetic effect of piled-up material around the nanoindentation cavity on additively manufactured Cu-Cr-Zr alloy | Materials Today Communications | G Prabu N Jeyaprakash Che-Hua Yang S Sivasankaran | 2024/3/1 |
Effect of microstructural evolution during melt pool formation on nano-mechanical properties in LPBF based SS316L parts | Journal of Alloys and Compounds | N Jeyaprakash M Saravana Kumar Che-Hua Yang Yanhai Cheng N Radhika | 2024/1/25 |
Investigation on deformation of nano-twins of LPBF produced Cu alloy through Triboindenter | Tribology International | G Prabu N Jeyaprakash Che-Hua Yang Ibrahim A Alnaser | 2024/3/1 |
Influence of defects formation on the cracking behavior of LPBFed Cu-Cr-Zr alloy: Micro-mechanism and CRITIC-WASPAS approach | Engineering Failure Analysis | M Saravana Kumar N Jeyaprakash Che-Hua Yang | 2024/6/1 |
Effect of martensitic phase formation on the nano-mechanical attributes during the electron beam melting process of Ti-6Al-4V | Materials Characterization | N Jeyaprakash M Saravana Kumar Che-Hua Yang Yan-hai Cheng S Sivasankaran | 2024/1/1 |
An Enhancement in the Copper Electrode Wear Characteristic Electrical Discharge Machined Inconel 718 through Ion Nitriding, Laser Surface Hardening and Hybrid Process | Surface Review and Letters | S Dhanabalan D Raj Kumar N Jeyaprakash M Satheesh Kumar Hitesh Vasudev | 2024/4/4 |
Correlation Between Microstructure and Corrosion Behavior of the Dissimilar Joints of Incoloy 800HT and P91 Steel Using GTAW Process | Transactions of the Indian Institute of Metals | V Lakshmanan P Sathiya T Arunnellaiappan N Jeyaprakash | 2024/3 |
Microstructural Evolution And Anti-Corrosion Characteristics Of As-Cast And Lpbf Printed Inconel Plates In Seawater Environment | Surface Review and Letters (SRL) | N Jeyaprakash Che-Hua Yang Sundara Subramanian Karuppasamy N Radhika | 2024 |
Nanowear characterization of LPBF fabricated CuCrZr alloy | Tribology International | G Prabu Che-Hua Yang Ibrahim A Alnaser N Jeyaprakash | 2024/2/29 |
Influence of scanning speed on microstructure and corrosion resistance of Fe-based amorphous coatings by high-speed laser cladding | Surface and Coatings Technology | Hainan Wang Yanhai Cheng Yixing Wan Natarajan Jeyaprakash Yunfei Wang | 2024/3/15 |
Mechanical property analysis and tribological response optimization of SiC and MoS2 reinforced hybrid aluminum functionally graded composite through Taguchi's DOE | Journal of Manufacturing Processes | S Sidharthan G Raajavignesh R Nandeeshwaran N Radhika R Jojith | 2023/9/29 |
The Sensors in Future Vehicles | Sundara Subramanian Karuppasamy N Jeyaprakash Che-Hua Yang | 2023/11/29 | |
Structural and nanohardness of laser melted CM247LC nickel-based superalloy | Transactions of the Indian Institute of Metals | N Jeyaprakash G Prabu Che-Hua Yang Manikanta Prasad Banda E Mohan | 2023/2 |
Impact on Overlapping of Consecutive Scan Tracks on the Mechanical Properties of LPBFed Cu-Cr-Zr Parts: An Integrated Approach | Arabian Journal for Science and Engineering | M Saravana Kumar N Jeyaprakash Che-Hua Yang | 2023/12/26 |
Analysis of friction stir welds using numerical modelling approach: a comprehensive review | Yogita Sharma Amrinder Mehta Hitesh Vasudev N Jeyaprakash Gaurav Prashar | 2023/5/6 | |
Effect of α-Al and Si precipitates on microstructural evaluation and corrosion behavior of laser powder bed fusion printed AlSi10Mg plates in seawater environment | Metals and Materials International | Periyakaruppan Murugesan V Satheeshkumar N Jeyaprakash Che-Hua Yang Sundara Subramanian Karuppasamy | 2023/9 |
Enhancing microstructural, mechanical and tribological behaviour of AlSiBeTiV high entropy alloy reinforced SS410 through friction stir processing | Tribology International | S Ragunath N Radhika S Aravind Krishna N Jeyaprakash | 2023/10/1 |
Co-Authors
