Muharrem Pul
Kirikkale Üniversitesi
H-index: 8
Asia-Turkey
Top articles of Muharrem Pul
Title | Journal | Author(s) | Publication Date |
---|---|---|---|
Effect of additive type and amount on structural and mechanical properties of ZrO2/B4C/Al2O3/SiC added Al 1050 based composite structures produced by vacuum infiltration … | Journal of Vacuum Science & Technology A | Muharrem Pul | 2024/3/1 |
Investigation of the effect of lubricant properties of carbon nanomaterial in Cu/MWCNT composites on wear | Frontiers in Materials | Muharrem Pul Rüstem Yılmazel Mustafa Yasin Erten Gökhan Küçüktürk Duran Kaya | 2024/1/18 |
Al 2024 Matrisli Farklı Boyutlarda MgO Takviyeli Kompozitlerin Farklı Kesici Takımlarla Tornalanmasında Yüzey Pürüzlülüğü Takım Aşınması ve Talaş Formunun İncelenmesi | Düzce Üniversitesi Bilim ve Teknoloji Dergisi | PUL Muharrem | 2023/1/1 |
The Effect of Material Ratios on Technical Properties in Fly Ash and Blast Furnace Slag Based Aluminum Chip Reinforced Geopolymer Mortars | Ahmet FİLAZİ Rüstem YILMAZEL Muharrem PUL | 2023 | |
The Effect of SiC and MgO Ceramic Reinforcements on the Mechanical Behavior and Electrical Properties of the Composite Structure in Al7075/SiC/MgO Hybrid Composites | International Journal of Engineering Research and Development | Mustafa Yasin Erten Rustem YİLMAZEL Ahmet Filazi PUL Muharrem | 2023/12/1 |
The effect of sintering parameters and MgO ratio on structural properties in Al7075/MgO composites: a review | Muharrem Pul Umit Erdem Mustafa Burak Turkoz Gürcan Yildirim | 2023/1 | |
Piroteknik Malzemelerin Ömürlerinin Belirlenmesinde Kullanılan Yaşlandırma Mekanizmalarının İncelenmesi | Kaan Turgay ÖZKAN PUL Muharrem | 2023 | |
Determination of optimum blast furnace slag ash and hemp fiber ratio in cement mortars | Structures | Ahmet Filazi Songül Tortuk Muharrem Pul | 2023/11/1 |
Effect of TiB2 and GNP reinforcements on machinability in drilling of Al7075/TiB2/GNP hybrid composites produced by powder metallurgy | Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science | Selçuk Yağmur Muharrem Pul | 2023 |
Optimization of PMEDM process parameters for B4C and B4C+ SiC reinforced AA7075 composites | Journal of Engineering Research | Gözde Keskin Sachin Salunkhe Gökhan Küçüktürk Muharrem Pul Hakan Gürün | 2023/9/12 |
The effect of sintering temperature and time on microstructure, hardness and wear behaviors of Al 99.9/GNP composites | Science of Sintering | Muharrem Pul Umit Erdem Onur Zuhtu Pehlivanli | 2023 |
EFFECT OF GRAPHITE POWDER ADDITIVES ON MECHANICAL PROPERTIES AND ELECTRICAL CONDUCTIVITY IN BLAST FURNACE SLAG-BASED ALKALI-ACTIVATED MORTARS | Mühendislik Bilimleri ve Tasarım Dergisi | Muharrem Pul Ahmet Filazi Rüstem Yılmazel | 2023/9/28 |
Nitroselüloz Bazlı Yakıtların Depolama Ömürlerine Ortam Koşullarının Etkisinin İncelenmesi | International Journal of Engineering Research and Development | Mehmet Çağlayan PUL Muharrem Ayşegül Ülkü Metin | 2023/1/1 |
Investigation of the machinability of B4C+TiB2/Al 2024 composite manufactured by powder metallurgy with EDM | Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science | Hacı Bekir Özerkan Mehmet Subaşı Muharrem Pul | 2023/3 |
Investigation of Electrical Conductivity in Cement Mortars with Waste Iron Chips. | International Journal of Engineering Research & Development (IJERAD) | Rüstem Yılmazel Ahmet Filazi Muharrem Pul | 2023/12/1 |
Al 6061 alaşımının işlenmesinde kesme derinliği ve kesici takım geometrisinin yüzey pürüzlülüğüne ve takım aşınma davranışına etkisi | Gazi Üniversitesi Mühendislik Mimarlık Fakültesi Dergisi | PUL Muharrem Hacı Bekir Özerkan | 2022/2/2 |
The effect of cutting depth and cutting tool geometry on surface roughness and tool wear behavior in the machining of Al 6061 alloy | Journal of the Faculty of Engineering and Architecture of Gazi University | Muharrem Pul Hacı Bekir Özerkan | 2022/1/1 |
The effect of carbon nanotube amount in machining of ZA-27 matrix carbon nanotube reinforced nano composite | Matéria (Rio de Janeiro) | Muharrem Pul | 2023/1/16 |
Examination of the effect of B4C and GNP reinforcements on machinability in the machining of Al 6061 matrix B4C/GNP reinforced hybrid composites | JOURNAL OF THE BRAZILIAN SOCIETY OF MECHANICAL SCIENCES AND ENGINEERING | Muharrem Pul Selçuk Yağmur | 2022 |
Boraks Pentahidrat İkamesinin Çimento Harcının Ses Geçirme ve Mekanik Özelliklerine Etkisi | International Journal of Engineering Research and Development | Ahmet Filazi PUL Muharrem | 2022/7/7 |