Lode Daelemans
Universiteit Gent
H-index: 23
Europe-Belgium
Top articles of Lode Daelemans
Mixed experimental-numerical method for quantitative measurement of mode II fibre/matrix interface debonding and comparison of fibre sizings in single short fibre composites
Polymer Testing
2024/4/26
Lode Daelemans
H-Index: 14
Wim Van Paepegem
H-Index: 35
Thermomechanical characterisation of reprocessable, siloxane-based, glass-fibre-reinforced vitrimers
Composites Part B: Engineering
2024/3/1
Experimental method for in-situ real-time measurement of mixed mode fibre/matrix interface debonding and comparison of fibre sizings in single short fibre composites
Composites Science and Technology
2024/2/8
Lode Daelemans
H-Index: 14
Wim Van Paepegem
H-Index: 35
Study of self-heating and local strain rate in polyamide-6 and short fibre glass/polyamide-6 under tension through synchronised full-field strain and temperature measurements
Polymer Testing
2024/2/5
Lode Daelemans
H-Index: 14
Wim Van Paepegem
H-Index: 35
Chemical and structural induced ductile-to-brittle transition in electrospun silica nanofiber membranes
Ceramics International
2023/10/15
Lode Daelemans
H-Index: 14
ECCM Research Topic on advanced manufacturing of composites
2023/9/27
Cell guiding multicomponent nanoyarn tendon scaffolds with tunable morphology and flexibility
ACS Applied Materials & Interfaces
2023/8/31
Lode Daelemans
H-Index: 14
Richard Hoogenboom
H-Index: 51
Development of a versatile speckle pattern of nano-sized polymer particles for high-resolution SEM-DIC
Polymer Testing
2023/8/1
Wim Van Paepegem
H-Index: 35
Lode Daelemans
H-Index: 14
A novel technique to simulate and characterize yarn mechanical behavior based on a geometrical fiber model extracted from microcomputed tomography imaging
Textile Research Journal
2023/5
Lode Daelemans
H-Index: 14
Joris Degroote
H-Index: 25
Microscale and macroscale deformation behavior of electrospun polymeric nanofiber membranes using in situ sem during mechanical testing
Polymers
2023/3/24
Lode Daelemans
H-Index: 14
Nieuws uit de vakgroep: Nabeschouwing ITMA-CTSE zet in op virtualisatie en simulatiestrategieën
Unitex
2023
Lode Daelemans
H-Index: 14
Characterizing a yarn’s mechanical behaviour on microscale level using a high-fidelity geometrical fiber model
2023
Lode Daelemans
H-Index: 14
Joris Degroote
H-Index: 25
Continuous fiber-reinforced aramid/PETG 3D-printed composites with high fiber loading through fused filament fabrication
Polymers
2022/1/12
Lode Daelemans
H-Index: 14
Wim Van Paepegem
H-Index: 35
A new virtual fiber modeling approach to predict the kinematic and mechanical behavior of through-thickness fabric compression
2022
Lode Daelemans
H-Index: 14
Baris Caglar
H-Index: 8
Véronique Michaud
H-Index: 32
Wim Van Paepegem
H-Index: 35
Nieuws uit de vakgroep: Elektrospinnen als nieuwe coatingtechnologie
UNITEX
2022
Lode Daelemans
H-Index: 14
Observing deformation mechanisms at microscale
2022
Lode Daelemans
H-Index: 14
Wim Van Paepegem
H-Index: 35
Microscale numerical simulation of yarn tensile behavior using a high-fidelity geometrical fiber model extracted from micro-CT imaging
2022
Lode Daelemans
H-Index: 14
Joris Degroote
H-Index: 25
Effect of fibre orientation, temperature, moisture content and strain rate on the tensile behaviour of short glass fibre-reinforced polyamide 6
2022
Lode Daelemans
H-Index: 14
Wim Van Paepegem
H-Index: 35
Micro-scale measurements on epoxy using in-situ microscopic techniques
2022
Lode Daelemans
H-Index: 14
Wim Van Paepegem
H-Index: 35
Mechanical study of the tensile prperties of epoxy at the microscale level
2022
Lode Daelemans
H-Index: 14
Wim Van Paepegem
H-Index: 35