Jan Ivens
Katholieke Universiteit Leuven
H-index: 31
Europe-Belgium
Top articles of Jan Ivens
Title | Journal | Author(s) | Publication Date |
|---|---|---|---|
Investigation of fiber content evaluation methods of carbon fiber reinforced thermoplastic composites | Journal of Thermoplastic Composite Materials | Kasahun Niguse Asfew David Moens Jan Ivens | 2024/1 |
Unsaturated out-of-plane permeability measured with three-dimensional flow monitoring by etched optical fiber sensors | Journal of Composite Materials | Xiao Liu Pedro Sousa Helge Pfeiffer Stepan V Lomov Jan Ivens | 2024/3/1 |
Achieving highly accurate cavity thickness measurements in fabric compaction | Pedro Sousa Xiao Liu Stepan V Lomov Jan Ivens | 2024/2/23 | |
Mechanical and interfacial analysis of 3D-printed two-matrix continuous carbon fibre composites for enhanced structural performance | Composites Part A: Applied Science and Manufacturing | Fei Liu Shenru Wang Wuxiang Zhang Xilun Ding Eleonora Ferraris | 2024/2/22 |
DSC and XRD Crystallinity Measurements for Carbon Fiber-reinforced Polyamide-6 Laminates Processed at Different Cooling Rates | 23rd International Conference on Composite Materials | Sepehr Simaafrookhteh Stepan Vladimirovitch Lomov Jan Ivens | 2024/2/8 |
Measuring the interlaminar fracture toughness of thin carbon fiber/polyamide6 composites using adhesively bonded stiffeners | Composites Part A: Applied Science and Manufacturing | Sepehr Simaafrookhteh Panayiotis Tsokanas Theodoros Loutas Stepan V Lomov Jan Ivens | 2024/1/1 |
Mode-I fracture toughness of thin CF/PA6 UD composites identified in a DCB test with stiffening Al beams in the presence of debonding | Sepehr Simaafrookhteh Stepan V Lomov Jan Ivens | 2023/5/31 | |
A topology-based in-plane filtering technique for the combined topology and discrete fiber orientation optimization | Computer Methods in Applied Mechanics and Engineering | Konstantinos-Iason Ypsilantis George Kazakis Matthias GR Faes Jan Ivens Nikos D Lagaros | 2023/12/1 |
Forming-behavior characterization of cross-ply carbon fiber/PA6 laminates using the bias-extension test | Composites Part A: Applied Science and Manufacturing | Daniele Zomer Sepehr Simaafrookhteh Kristof Vanclooster Andrea Dorigato Jan Ivens | 2023/5/1 |
The effect of the setting force on the static strength of a blind rivet nut set in CFRP | Composite Structures | Arne Van de Velde Jan Maeyens Jan Ivens Sam Coppieters | 2023/3/1 |
Numerical and experimental optimization of blind rivet nuts for novel applications | Arne Van de Velde | 2023/11/9 | |
Novel Sustainable Composites Incorporating a Biobased Thermoplastic Matrix and Recycled Aerospace Prepreg Waste: Development and Characterization | Polymers | José Antonio Butenegro Mohsen Bahrami Yentl Swolfs Jan Ivens Miguel Ángel Martínez | 2023/8/18 |
Robust topology optimization for fiber-reinforced composites under material uncertainty | Computer Methods in Applied Mechanics and Engineering | Sheng Chu Mi Xiao Liang Gao Yan Zhang Jinhao Zhang | 2021/10/1 |
Comparison of warp knitted and stitched non-crimp fabrics | Hugo Pattyn Ignace Verpoest Jan Ivens E Villalon | 2022/1/26 | |
The effect of the setting force on the fatigue resistance of a blind rivet nut set in CFRP | Key Engineering Materials | Arne Van de Velde Jan Ivens Jan Maeyens Sam Coppieters | 2022/8/22 |
An approach for the concurrent homogenization-based microstructure type and topology optimization problem | Computers & Structures | Konstantinos-Iason Ypsilantis Matthias GR Faes Jan Ivens Nikos D Lagaros David Moens | 2022/11/1 |
A material interpolation technique based on the simplex polytope | ECCOMAS Proceedia | Konstantinos Iason Ypsilantis Matthias Faes Jan Ivens David Moens | 2022/7/11 |
Prediction of the equilibrium moisture content based on the chemical composition and crystallinity of natural fibres | Industrial Crops and Products | Nick Sweygers Delphine EC Depuydt Samuel Eyley Wim Thielemans Yasmine Mosleh | 2022/10/15 |
Mechanical investigation and microstructure performance of a two-matrix continuous carbon fibre composite fabricated by 3D printing | Journal of Manufacturing Processes | Fei Liu Eleonora Ferraris Jan Ivens | 2022/7/1 |
Novel thermoplastic composites strengthened with carbon fiber-reinforced epoxy composite waste rods: Development and characterization | Polymers | José Antonio Butenegro Mohsen Bahrami Yentl Swolfs Jan Ivens Miguel Ángel Martínez | 2022/1 |
