Lan Peng
University of Science and Technology Beijing
H-index: 16
Asia-China
Top articles of Lan Peng
Characteristics of Primary Carbide and Its Evolution During Hot Rolling in High-Carbon Chromium Bearing Steel
2024/2/7
Dendrite Structure, Spot Segregation and Banded Defect of Gear Steel in Continuous Casting and Rolling Process
Metallurgical and Materials Transactions B
2023/4
Effect of cerium on microstructure, eutectic carbides and Laves phase in electroslag remelted 15Cr–22Ni–1Nb austenitic heat-resistant steel
Journal of Iron and Steel Research International
2023/2
Magnetic property regulation and mechanism analysis of FeSiBC soft magnetic composites by mixing with FeSiCr or carbonyl iron powder
Journal of Magnetism and Magnetic Materials
2023/12/15
Formation and control of the surface defect in hypo-peritectic steel during continuous casting: A review
2023/12
Semi-macrosegregation and carbide banding in high-carbon chromium bearing steels: Characteristics, evolution, and control
Journal of Materials Research and Technology
2023/11/1
Precipitation and growth of Laves phase and NbC during aging and its effect on tensile properties of a novel 15Cr–22Ni–1Nb austenitic heat-resistant steel
Materials Science and Engineering: A
2022/9/27
Insights into ZrO2-and Al2O3-based submerged entry nozzle clogging for the continuous casting of RE-treating sulfur resistant casing steel
Ceramics International
2022/7/15
Study on Parameter Optimization of Diversion Wall in an Eight-Strand Tundish during Continuous Casting of Billet with High Casting Speed
Processes
2022/3/11
Characteristics of the as-cast high-carbon microalloyed continuous casting bloom steel for expansion-break connecting rods
Chinese Journal of Engineering
2022/2/15
Effect of melting rate of electroslag rapid remelting on the microstructure and carbides in a hot work tool steel
Metals and Materials International
2021/9
Effect of M-EMS current intensity on the subsurface segregation and internal solidification structure for bloom casting of 42CrMo steel
Ironmaking & Steelmaking
2021/8/9
Precipitation criterion for inhibiting austenite grain coarsening during carburization of Al-containing 20Cr gear steels
Metals
2021/3/18
Control of shrinkage porosity and spot segregation in Ø195 mm continuously cast round bloom of oil pipe steel by soft reduction
Metals
2020/12/23
Effect of slab charging temperature on reverse transformation behavior and induced crack sensitivity through experiments and micromechanical analysis
Materials & Design
2020/9/1
Refinement of the solidification structure of austenitic Fe-Mn-C-Al TWIP steel
Metallurgical and Materials Transactions B
2020/4
Solidification Structure Refinement in TWIP Steel by Ce Inoculation
Acta Metall Sin
2020/1/6