Kubilay Aslantas
Afyon Kocatepe Üniversitesi
H-index: 29
Asia-Turkey
Top articles of Kubilay Aslantas
Title | Journal | Author(s) | Publication Date |
---|---|---|---|
Effect of cutting conditions on tool wear and wear mechanism in micro-milling of additively manufactured titanium alloy | Tribology International | K Aslantas A Hasçelik A Erçetin Mohd Danish Luqman KH Alatrushi | 2024/5/1 |
The influence of drilling-induced damages and hole quality on hoop tensile and fatigue behavior of CFRP tubes | Composites Part A: Applied Science and Manufacturing | Sezer Morkavuk Kubilay Aslantaş Lokman Gemi Uğur Köklü Şakir Yazman | 2024/4/1 |
Performance of conventional and wiper CBN inserts under various cooling conditions in hard turning of AISI 52100 steel | Materials Testing | Hüseyin Alp Çetindağ Adem Çiçek Necati Uçak Kubilay Aslantas | 2024/2/26 |
Optimization of machining parameters to minimize cutting forces and surface roughness in micro-milling of Mg13Sn alloy | Micromachines | Ali Ercetin Kubilay Aslantaş Özgür Özgün Mustafa Perçin Manjunath Patel Gowdru Chandrashekarappa | 2023/8/12 |
An experimental comprehensive analysis of drilling carbon fiber reinforced plastic tubes and comparison with carbon fiber reinforced plastic plate | Journal of Reinforced Plastics and Composites | Sezer Morkavuk Uğur Köklü Kubilay Aslantaş | 2023/4 |
Optimization of Micro-Drilling of Laminated Aluminum Composite Panel (Al–PE) Using Taguchi Orthogonal Array Design | Materials | Bekir Yalçın Ali Yüksel Kubilay Aslantaş Oguzhan Der Ali Ercetin | 2023/6/22 |
Determination of the friction coefficients between uncoated WC-Co tools and L-PBF and wrought Ti-6Al-4V alloys for micro-milling simulations | Procedia CIRP | Necati Uçak José Outeiro Kubilay Aslantas Adem Çiçek Barış Çetin | 2023/1/1 |
Microstructural and Mechanical Behavior Investigations of Nb-Reinforced Mg–Sn–Al–Zn–Mn Matrix Magnesium Composites | Metals | Ali Ercetin Özgür Özgün Kubilay Aslantaş Oguzhan Der Bekir Yalçın | 2023/6/10 |
Powder metal Al2O3 reinforced Mg5Sn matrix composites: Production and characterization | Journal of the Faculty of Engineering and Architecture of Gazi University | Ali Ercetin Ozgur Ozgun Kubilay Aslantas | 2023/1/1 |
Experimental evaluation of tool wear and surface roughness under different conditions in high-speed turning of Ti6Al4V alloy | Journal of Materials and Manufacturing | Necati Uçak Kubilay Aslantas Adem Çiçek | 2023/6/10 |
Comparative analysis of minimum chip thickness, surface quality and burr formation in micro-milling of wrought and selective laser melted Ti64 | Micromachines | Uçan Karakılınç Berkay Ergene Bekir Yalçın Kubilay Aslantaş Ali Erçetin | 2023/5/30 |
Constitutive modelling of Ti6Al4V alloy fabricated by laser powder bed fusion and its application to micro cutting simulation | Mechanics of Materials | Necati Uçak Adem Çiçek José Outeiro Kubilay Aslantas Barış Çetin | 2023/10/1 |
A comparative study on the machinability of β-type novel Ti29Nb13Ta4. 6Zr (TNTZ) biomedical alloys under micro-milling operation | Journal of Manufacturing Processes | Kubilay Aslantas Bilge Demir Ahmet Serdar Guldibi Mitsuo Niinomi Burak Dikici | 2023/4/28 |
Role of Duplex Aging Treatment on the Fatigue Crack Propagation Behavior of Ti-15V-3Al-3Sn-3Cr Metastable β Titanium Alloy | Journal of Testing and Evaluation | Nihal Yumak Kubilay Aslantaş | 2022/3/1 |
Performance evaluation of DLC and NCD coatings in micro-milling of Al7075-T6 alloy | Journal of Manufacturing Processes | Kubilay Aslantas Ahmet Hascelik Adem Çiçek | 2022/9/1 |
Mechanistic modeling of cutting forces in high-speed microturning of titanium alloy with consideration of nose radius | The International Journal of Advanced Manufacturing Technology | Kubilay Aslantas Şükrü Ülker Ömer Şahan Danil Yu Pimenov Khaled Giasin | 2022/3 |
An experimental investigations on effects of cooling/lubrication conditions in micro milling of additively manufactured Inconel 718 | Tribology International | Mohd Danish Kubilay Aslantas Ahmet Hascelik Saeed Rubaiee Munish Kumar Gupta | 2022/9/1 |
Yaşlandırma işlemi öncesi uygulanan kriyojenik işlemin Ti-15V-3Al-3Sn-3Cr metastabil β titanyum alaşımının yorulma çatlak ilerlemesi davranışlarına etkisi | Gazi Üniversitesi Mühendislik Mimarlık Fakültesi Dergisi | Nihal Yumak Kubilay Aslantaş Ahmet Çetkin | 2022/2/2 |
Machinability of 3D printed metallic materials fabricated by selective laser melting and electron beam melting: A review | Necati Uçak Adem Çiçek Kubilay Aslantas | 2022/8/1 | |
Effect of cryogenic treatments on the corrosion resistance and electrical conductivity of DIN 100Cr6 steel | Journal of Characterization | Mustafa Kocabaş Adem Cicek Atila Gürhan Çelik Ibrahim Gunes Kubilay Aslantaş | 2022/1 |