Khurram Altaf
Universiti Teknologi Petronas
H-index: 15
Asia-Malaysia
Top articles of Khurram Altaf
Title | Journal | Author(s) | Publication Date |
|---|---|---|---|
Multi-objective Optimization of Friction Stir Additively Manufactured Al-7075 Multi-layered Laminates | Journal of Alloys and Compounds | Adeel Hassan Khurram Altaf Mokhtar Awang Srinivasa Rao Pedapati Naveed Ahmed | 2024/4/27 |
Geometric Optimization of SLM-Printed AlSi10Mg Radial Heat Sinks: A Numerical and Experimental Approach for Natural Convection Conditions | Arabian Journal for Science and Engineering | Syed Waqar Ahmed Khurram Altaf Adeel Tariq Mohammed Alkahtani Johannes Buhl | 2024/2/20 |
An investigation of thermal and hydrodynamic behaviour of compound fins under turbulent flow conditions: A numerical and experimental approach | Alexandria Engineering Journal | Adeel Tariq Syed Waqar Ahmed Masri Bin Baharom Khurram Altaf Ghulam Hussain | 2024/2/1 |
Additive manufacturing based rapid tooling | Syed Waqar Ahmed Khurram Altaf G Hussain Junaid Qayyum Adeel Tariq | 2023/2/2 | |
Bending performance and failure mechanisms of hybrid and regular sandwich composite structures with 3D printed corrugated cores | Composite Structures | SZH Shah Khurram Altaf Juhyeong Lee Tahir Sharif Rizwan Saeed Choudhry | 2023/12/1 |
Investigation of the Process-Induced Defects in Metal Fused Deposition Modeling Process for Ultrafuse 316L Stainless Steel | Digital Manufacturing Technology | Abbas Raza Syed Waqar Ahmed Adeel Hassan Khurram Altaf Hongyu Wei | 2023/11/24 |
Microstructure and mechanical performance of low-cost biomedical-grade Titanium-316L alloy | Journal of Materials Research and Technology | Chowdhury Ahmed Shahed Faiz Ahmad Ebru Günister Khurram Altaf Saad Ali | 2023/11/1 |
Performance evaluation of 3D printed polymer heat exchangers: influence of printing temperature, printing speed and wall thickness with consideration of surface roughness | The International Journal of Advanced Manufacturing Technology | Aftab Ahmad Ahmad Abbas Ghulam Hussain Omar Al-Abbasi Mohammed Alkahtani | 2023/10 |
Investigation on Surface Hardness and Microstructure Evolution in AA 7075-T651 Multi-Layered Laminate Fabricated Through Friction Stir Additive Manufacturing. | Iranian Journal of Materials Science & Engineering | Adeel Hassan Mokhtar Awang Srinivasa Rao Pedapati Khurram Altaf Naveed Ahmed | 2023/12/1 |
STUDY AND ANALYSIS OF METAL PARTS FABRICATED THROUGH FUSED DEPOSITION MODELLING, DE-BINDING AND SINTERING PROCESSES | Journal of Engineering Science and Technology | ABBAS RAZA KHURRAM ALTAF FAIZ AHMAD CHOWDHURY A SHAHED SYED W AHMED | 2023/4 |
Experimental investigation on tool pin profile for defect-free multi-layered laminates using friction stir additive manufacturing | Results in Engineering | Adeel Hassan Mokhtar Awang Srinivasa Rao Pedapati Khurram Altaf Roshan Vijay Marode | 2023/12/1 |
Effect of Raster Angle and Infill Pattern on the In-Plane and Edgewise Flexural Properties of Fused Filament Fabricated Acrylonitrile–Butadiene–Styrene | Applied Sciences | Hamza Qayyum Ghulam Hussain Muhammad Sulaiman Malik Hassan Aaqib Ali | 2022/12/11 |
Thermal Analysis of Helical Pin Fins at Different Pitch Steps Through Numerical Technique | Syed Waqar Ahmed Adeel Tariq Khurram Altaf Sadaqat Ali Ghulam Hussain | 2022/12/1 | |
Thermal and hydraulic analysis of slotted plate fins heat sinks using numerical and experimental techniques | Case Studies in Thermal Engineering | Khurram Altaf Adeel Tariq Syed Waqar Ahmad Ghulam Hussain TAH Ratlamwala | 2022/7/1 |
Recent advancements in latent heat phase change materials and their applications for thermal energy storage and buildings: A state of the art review | Faisal Hassan Furqan Jamil Abid Hussain Hafiz Muhammad Ali Muhammad Mansoor Janjua | 2022/2/1 | |
Life cycle assessment and feasibility study of solar based multi-generation system | Sustainable Energy Technologies and Assessments | Eliezer Zahid Gill Tahir Abdul Hussain Ratlamwala Sheharyar Waseem G Hussain Mohammed Alkahtani | 2021/10/1 |
Comparative numerical and experimental analysis of thermal and hydraulic performance of improved plate fin heat sinks | Applied Thermal Engineering | Adeel Tariq Khurram Altaf Syed Waqar Ahmad Ghulam Hussain TAH Ratlamwala | 2021/1/5 |
Plate fin heat sink for the application in solar thermal power | Clean Energy Opportunities in Tropical Countries | Adeel Tariq Khurram Altaf Ghulam Hussain Muhammad Reezwan | 2021 |
Mechanical properties of an additive manufactured CF-PLA/ABS hybrid composite sheet | Syed Waqar Ahmed Ghulam Hussain Khalid A Al-Ghamdi Khurram Altaf | 2021/11 | |
On the effects of process parameters and optimization of interlaminate bond strength in 3D printed ABS/CF-PLA composite | Polymers | Syed Waqar Ahmed Ghulam Hussain Khurram Altaf Sadaqat Ali Mohammed Alkahtani | 2020/9/22 |
Co-Authors
