Jesus Manuel Alegre
Universidad de Burgos
H-index: 23
Europe-Spain
Top articles of Jesus Manuel Alegre
Title | Journal | Author(s) | Publication Date |
|---|---|---|---|
Ex-ante life cycle assessment of directed energy deposition based additive manufacturing: A comparative gearbox production case study | Sustainable Materials and Technologies | Mario Santiago-Herrera Elorri Igos JM Alegre Sonia Martel-Martín Rocío Barros | 2024/4/1 |
Hydrogen Embrittlement of AISI 316L steel produced by Selective Laser Melting | Procedia Structural Integrity | LB Peral A Díaz P Ebrahimzadeh I Fernández-Pariente J Alegre | 2024/1/1 |
Evaluating hydrogen embrittlement susceptibility of a 2205 DSS | Procedia Structural Integrity | LB Peral A Díaz R Rodríguez Aparicio JM Alegre II Cuesta | 2024/1/1 |
Adjustment of Mechanical Property Predictions for Structural Castings in the Wind Gearbox Sector | International Journal of Metalcasting | T Gómez II Cuesta JM Alegre | 2024/1 |
Effect of electrochemical charging on the hydrogen embrittlement susceptibility of a low-alloyed tempered martensitic steel submitted to high internal pressure | Acta Materialia | Xu Lu Dong Wang Di Wan ZB Zhang Nousha Kheradmand | 2019/10/15 |
Comportamiento en fatiga de una aleación de Ti-6Al-4V fabricada mediante Binder Jetting | Revista española de mecánica de la fractura | JM Alegre A Díaz R García LB Peral M Lorenzo | 2023 |
Mechanical Property Prediction Based on Casting Process Simulation for Structural Parts in the Wind Gearbox Sector | International Journal of Metalcasting | T Gómez II Cuesta JM Alegre | 2023/10 |
Efecto en las propiedades mecánicas del tamaño de impresión de estructuras tipo lattice de PA-12 fabricada mediante SLS | Revista española de mecánica de la fractura | R Rodríguez Aparicio Jesús Manuel Alegre Calderón Wilco MH Verbeeten Míriam Lorenzo Bañuelos Isidoro Iván Cuesta Segura | 2023 |
Methodology to predict mechanical properties of PA-12 lattice structures manufactured by powder bed fusion | Additive Manufacturing | Rubén Rodríguez-Aparicio JM Alegre Wilco MH Verbeeten Miriam Lorenzo-Bañuelos II Cuesta | 2023/9/25 |
Corrosion of materials from a teaching point of view | LB Peral A Díaz JM Alegre II Cuesta | 2023 | |
Influence of hydrogen on the hydraulic fracture behavior of a 42CrMo4 steel welds: Effect of the prior austenite grain size | Engineering Fracture Mechanics | LB Peral A Díaz V Arniella J Belzunce JM Alegre | 2023/9/1 |
Comparative life cycle assessment and cost analysis of the production of Ti6Al4V-TiC metal–matrix composite powder by high-energy ball milling and Ti6Al4V powder by gas atomization | The International Journal of Advanced Manufacturing Technology | Alessio Vita Vincenzo Castorani Michele Germani Marco Marconi | 2019/12 |
Critical review on allowable material data selection in structural design of large castings for wind turbine gearboxes | T Gómez II Cuesta JM Alegre | 2023/4 | |
Hydrogen uptake and diffusion kinetics in a quenched and tempered low carbon steel: experimental and numerical study | International Journal of Hydrogen Energy | LB Peral A Díaz JM Alegre II Cuesta | 2023/11/9 |
Mejora de las propiedades de materiales metálicos elaborados por fabricación aditiva mediante la técnica del Hot Isostatic Pressing. Caso de uso en industria | Jesús Manuel Alegre Calderón | 2022 | |
Notch fracture predictions using the Phase Field method for Ti-6Al-4V produced by Selective Laser Melting after different post-processing conditions | Theoretical and Applied Fracture Mechanics | Andrés Díaz JM Alegre I Iván Cuesta Emilio Martínez-Pañeda Z Zhang | 2022/10/1 |
Efecto del postprocesado mediante HIP a 850ºC/200 MPa en el comportamiento a fatiga de la aleación Ti-6AI-4V fabricada mediante SLM | Revista española de mecánica de la fractura. 2022, V. 4, p. 171-176 | Jesús Manuel Alegre Calderón Ricardo García Andrés Díaz Portugal Isidoro Iván Cuesta Segura | 2022 |
Effect of HIP post-processing at 850° C/200 MPa in the fatigue behavior of Ti-6Al-4V alloy fabricated by Selective Laser Melting | International Journal of Fatigue | JM Alegre A Díaz Ricardo García LB Peral II Cuesta | 2022/10/1 |
Conjunto de ecuaciones para el cálculo del factor de intensidad de tensiones en fisuras internas de barras cilíndricas sometidas a tracción | Revista española de mecánica de la fractura. 2022, V. 3, p. 119-124 | Jesús Manuel Alegre Calderón Isidoro Iván Cuesta Segura Andrés Díaz Portugal | 2022 |
Parameter optimisation in selective Laser Melting on C300 steel | Applied Sciences | II Cuesta A Díaz MA Rojo LB Peral J Martínez | 2022/9/28 |
