Francois Trochu
École Polytechnique de Montréal
H-index: 46
North America-Canada
Top articles of Francois Trochu
Title | Journal | Author(s) | Publication Date |
---|---|---|---|
Performance evaluation of unidirectional molds used for measuring saturated transverse permeability of engineering textiles | Composites Part A: Applied Science and Manufacturing | Bin Yang Yixun Sun François Trochu Cédric Béguin Jihui Wang | 2023/6/1 |
On the meso-structure spatial variability characterizing and geometric modelling of textile-based composite via volume imaging | Bin Yang Jihui Wang Philippe Causse Cédric Béguin François Trochu | 2023 | |
Experimental and numerical investigation of wall temperature in a heated pipe filled with beads | International Journal of Heat and Mass Transfer | Yixun Sun Cédric Béguin Philippe Causse Brahim Benmokrane François Trochu | 2022/8/15 |
Three Dimensional Resin Transfer Molding Simulations: Control of Accuracy and Industrial Validation for Complex Ribbed Parts | François Trochu J-F Remade J Bréard Y Benoit Edu Ruiz | 2022/1/26 | |
Hybrid twin models of fiber compaction for composite manufacturing based on dual kriging | International Journal of Material Forming | François Trochu N Vernet Y Sun J Echaabi A Makradi | 2022/5 |
Tomographic modelling of engineering textiles for numerical simulation: A parametric approach | Bin Yang François Trochu Cédric Béguin Jihui Wang Philippe Causse | 2022 | |
The influence of fabric architecture on impregnation behavior and void formation: artificial neural network and statistical‐based analysis | Polymer Composites | Francisco M Monticeli José Humberto S Almeida Jr Roberta M Neves Heitor L Ornaghi Jr François Trochu | 2022/5 |
Convective Heat Transfer Between a Bead Packing and Its Bounding Wall: Part I—Theory | Transport in Porous Media | Yixun Sun Cédric Béguin Philippe Causse Brahim Benmokrane François Trochu | 2022/6 |
A coupled 1D/2D co simulation approach for flow pattern of fiber reinforced composite in the VARTM process | Yuwei Feng Philippe Causse Jihui Wang François Trochu | 2022 | |
The Story of Permeability in Liquid Composite Molding (LCM): How to Devise and Validate Process Simulation Software? | Francois Trochu | 2022/4/12 | |
Creation of digital material twin (dmt) geometric models of high performance composites based on x-ray microtomography | François Trochu B Yang J Wang Cédric Béguin P Causse | 2022 | |
On the design of test molds based on unidirectional saturated flows to measure transverse permeability in liquid composite molding | Polymer Composites | Bin Yang Wei Huang Philippe Causse Cédric Béguin Jihui Wang | 2022/4 |
Simultaneous characterization of preform expansion and permeability in vacuum assisted resin infusion | Polymer Composites | Zaynab Grofti Bruno Croteau‐Labouly Rachid Boukhili Philippe Causse Salim Belouettar | 2022/6 |
Closure to “Permeability Measurement of Granular Porous Materials by a Modified Falling-Head Method” by Yixun Sun, Philippe Causse, Brahim Benmokrane, and François Trochu | Journal of Engineering Mechanics | Yixun Sun Philippe Causse François Trochu | 2022/3/1 |
Wrinkling analysis of circular membranes by a Fourier based reduced model | Thin-Walled Structures | Wei Huang Wei Yan Rui Xu Qun Huang Jie Yang | 2021/4/1 |
Experimental characterisation of textile compaction response: A benchmark exercise | Composites Part A: Applied Science and Manufacturing | Ana XH Yong Alper Aktas David May Andreas Endruweit SV Lomov | 2021/3/1 |
A 3D additive manufacturing approach for the validation of a numerical wall-scale model of catalytic particulate filters | Chemical Engineering Journal | Igor Belot Yixun Sun David Vidal Martin Votsmeier Philippe Causse | 2021/2/1 |
Out-of-plane permeability measurement for reinforcement textiles: A benchmark exercise | Composites Part A: Applied Science and Manufacturing | AXH Yong Alper Aktas David May Andreas Endruweit S Advani | 2021/9/1 |
An experimental device and an inverse method to determine the thermal conductivity of a fiber reinforced composite as a function of temperature and state of cure | H Menge François Trochu A Millischer V Sobotka | 2020/9/23 | |
Analysis of Thermal Residual Stresses during the Curing of Composite Parts Manufactured by Resin Transfer Molding | Edu Ruiz François Trochu | 2020/12/17 |