Dr. Mohammad Tauviqirrahman, S.T., M.T.
Universitas Diponegoro
H-index: 18
Asia-Indonesia
Top articles of Dr. Mohammad Tauviqirrahman, S.T., M.T.
Title | Journal | Author(s) | Publication Date |
|---|---|---|---|
Running-in behavior of dual-mobility cup during the gait cycle: A finite element analysis | Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine | Taufiq Hidayat Rifky Ismail Mohammad Tauviqirrahman Eko Saputra Muhammad Imam Ammarullah | 2024/1 |
Assessment of polyethylene wear in dual mobility implant for Asians on various head-to-liner ratios: A finite-element analysis | Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology | Taufiq Hidayat Muhammad Imam Ammarullah Rifky Ismail Mohammad Tauviqirrahman Eko Saputra | 2024/3/26 |
The synergistic influence of texture and slip formations in hydrodynamic thrust bearings on tribological characteristics | Results in Engineering | Imam Syafaat Zukhruf Ilyas Hadi Rois Muchammad Muchammad Mohammad Tauviqirrahman Budi Setiyana | 2024/3/1 |
Performance of textured dual mobility total hip prosthesis with a concave dimple during Muslim prayer movements | Scientific Reports | M Muchammad Mohammad Tauviqirrahman Muhammad Imam Ammarullah Muhammad Iqbal Budi Setiyana | 2024/1/9 |
Validitas Persamaan Reynolds Terhadap Efek Inersia dan Slip dalam Pemodelan Pelumasan Hidrodinamik pada Permukaan Parallel Bearing Bertekstur | Jurnal Rekayasa Mesin | Fuad Hilmy Herru Santosa Ikhwan Taufik M Muchammad Mohammad Tauviqirrahman | 2024/4/30 |
Elastohydrodynamic analysis of composite material with roughness effect on multistep journal bearing tribological performance | Jurnal Tribologi | Muchammad Muchammad Mohammad Tauviqirrahman Savero Farhansyah Muhammad Iqbal Budi Setiyana | 2024 |
Performance Enhancement of Falling Film Dehumidifier by Variation Number and Width Ratio Rectangular Cylinder Based on CFD Simulation | International Journal of Heat and Mass Transfer | Fatkhur Rokhman Eflita Yohana Mohammad Tauviqirrahman Muhammad Ichwan Faried Mohamad Endy Yulianto | 2024/4/1 |
Tribological performance of novel modified Calophyllum Inophyllum nano-fluid from Pahang, Malaysia | Jurnal Tribologi | Amiril Sahab Abdul Sani Zubaidah Zamri Radhiyah Abd Aziz Ainaa Mardhiah Sabri Norfazillah Talib | 2024 |
A Comparative Study on Hydrodynamic Analysis with and without Cavitation Modelling: A Study on Textured Slip Journal Bearing | CFD Letters | Althesa Androva Muhammad Tauviqirrahman Nazaruddin Sinaga Muhammad Khafidh Muhammad Sagaf | 2024/3/31 |
Multiphase Flow Analysis of Three-Dimensional Journal Bearing with Roughness Using Computational Fluid Dynamics (CFD) | S Susilowati Silvana Dwi Nurherdiana Erwan Adi Saputro Mohammad Tauviqirrahman Dani Arfiandani | 2023/10/29 | |
ANALISIS KEGAGALAN CONNECTING ROD PADA SEPEDA MOTOR 4 LANGKAH DENGAN KAPASITAS 110 CC | JURNAL TEKNIK MESIN | Insannul Fikri Sri Nugroho Mohammad Tauviqirrahman | 2023/7/31 |
STUDI NUMERIK PERFORMA HIDRODINAMIKA PONTOON PESAWAT TERBANG AMFIBI BERKAPASITAS 17 PENUMPANG | JURNAL TEKNIK MESIN | Zakaria Rahmanu Eflita Yohana Mohammad Tauviqirrahman | 2023/10/30 |
Analysis of the effect of ventilation hole angle and material variation on thermal behavior for car disc brakes using the finite element method | Results in Engineering | Mohammad Tauviqirrahman M Muchammad Tian Setiazi Budi Setiyana J Jamari | 2023/3/1 |
STUDI PER PERBANDINGAN INVESTIGASI MODULUS ELASTISITAS ANTARA METODE UJI TARIK DENGAN METODE INDENTASI PADA MATERIAL STYRENE BUTADIENE RUBBER 25 (SBR-25) | JURNAL TEKNIK MESIN | Desano Indera Sakti Budi Setiyana Mohammad Tauviqirrahman | 2023/4/14 |
Analysis of the journal bearing performance considering artificial surface roughness and cavitation using CFD FSI method | AIP Conference Proceedings | Muhammad Sagaf Nazaruddin Sinaga Mohammad Tauviqirrahman Muhammad Khafidh Althesa Androva | 2023/5/8 |
2D finite element deformation investigation on CoCrMo-on-CoCrMo bearing of total hip implant under normal walking condition | AIP Conference Proceedings | Muhammad Imam Ammarullah Ilham Yustar Afif Mohamad Izzur Maula Tri Indah Winarni Mohammad Tauviqirrahman | 2023/5/16 |
PERANCANGAN SISTEM GRIPPER MESIN UJI TARIK UNTUK MENCEGAH SLIP PADA UNIVERSAL TESTING MACHINE DEPARTEMEN TEKNIK MESIN UNIVERSITAS DIPONEGORO | JURNAL TEKNIK MESIN | Sasongko Admaja Adhi Rusnaldy Rusnaldy Mohammad Tauviqirrahman | 2023/7/30 |
An overview of biodiesel, a fuel blend made from palm oil. | VA Fardilah YM Pusparizkita M Tauviqirrahman AP Bayuseno | 2023/12/1 | |
PENGUJIAN TARIK SECARA TERPUTUS PADA BAJA KARBON RENDAH AISI 1018 | JURNAL TEKNIK MESIN | Dede Jumadi Rusnaldy Rusnaldy Mohammad Tauviqirrahman | 2023/10/30 |
Investigation of mesh model for a finite element simulation of the dual-mobility prosthetic hip joint | Jurnal Tribologi | Taufiq Hidayat Rifky Ismail Mohammad Tauviqirrahman Eko Saputra Muhammad Imam Ammarullah | 2023/9/1 |
