Dong-Woo Suh

About Dong-Woo Suh

Dong-Woo Suh, With an exceptional h-index of 43 and a recent h-index of 32 (since 2020), a distinguished researcher at Pohang University of Science and Technology, specializes in the field of iron and steels.

His recent articles reflect a diverse array of research interests and contributions to the field:

Acceleration of bainitic transformation in 0.28 C-3.8 Mn-1.5 Si steel utilizing chemical heterogeneity

Development of functionally graded austenitic lightweight steel through electrically assisted pressure solid-state joining

Ultrastrong and ductile steel welds achieved by fine interlocking microstructures with film-like retained austenite

Influence of Silicon Contents on the Microstructure and Tensile Properties of Quenching and Partitioning (Q&P) Processed Low Carbon Steel

Hydrogen trapping characteristics and mechanical degradation in a duplex stainless steel

Influence of starting microstructure on the microstructure evolution during annealing and the yield strength in Nb-Ti microalloyed cold-rolled steel

Observation of multi-scale damage evolution in transformation-induced plasticity steel under bending condition

Influence of Partial Replacement of Co with Cu on Isothermal Transformation Kinetics in Ferritic/Martensitic Heat‐Resistant Steel

Dong-Woo Suh Information

University

Position

___

Citations(all)

6688

Citations(since 2020)

3594

Cited By

4530

hIndex(all)

43

hIndex(since 2020)

32

i10Index(all)

121

i10Index(since 2020)

90

Email

University Profile Page

Pohang University of Science and Technology

Google Scholar

View Google Scholar Profile

Dong-Woo Suh Skills & Research Interests

iron and steels

Top articles of Dong-Woo Suh

Title

Journal

Author(s)

Publication Date

Acceleration of bainitic transformation in 0.28 C-3.8 Mn-1.5 Si steel utilizing chemical heterogeneity

Scripta Materialia

Ji Hoon Kim

Guiyoung Gu

Seok-Hwan Hong

Chang Jae Yu

Minseo Koo

...

2024/1/15

Development of functionally graded austenitic lightweight steel through electrically assisted pressure solid-state joining

Materials Science and Engineering: A

Siwhan Lee

Joonoh Moon

Hwangsun Kim

Yong Hwan Cho

Ho Hyeong Lee

...

2024/1/1

Ultrastrong and ductile steel welds achieved by fine interlocking microstructures with film-like retained austenite

Nature Communications

Joonoh Moon

Gyuyeol Bae

Bo-Young Jeong

Chansun Shin

Min-Ji Kwon

...

2024/2/12

Influence of Silicon Contents on the Microstructure and Tensile Properties of Quenching and Partitioning (Q&P) Processed Low Carbon Steel

ISIJ International

Chang Jae Yu

Chang-Hyo Seo

Young-Roc Im

Dong-Woo Suh

2024/1/30

Hydrogen trapping characteristics and mechanical degradation in a duplex stainless steel

Metals and Materials International

Dae Geon Lee

Ji Hoon Kim

Seong Hoon Kim

Heon Young Ha

Tae Ho Lee

...

2023/1

Influence of starting microstructure on the microstructure evolution during annealing and the yield strength in Nb-Ti microalloyed cold-rolled steel

Materials Science and Engineering: A

Seok-Hwan Hong

Ji Hoon Kim

Jae Hoon Lee

Dong-Woo Suh

2023/10/17

Observation of multi-scale damage evolution in transformation-induced plasticity steel under bending condition

Materials Today Communications

Gang Hee Gu

Min Hong Seo

Dong-Woo Suh

Hyoung Seop Kim

2023/3/1

Influence of Partial Replacement of Co with Cu on Isothermal Transformation Kinetics in Ferritic/Martensitic Heat‐Resistant Steel

steel research international

Seokhwan Ju

Ho Hyeong Lee

Jong-Ho Shin

Dong-Woo Suh

2023/2

The contents of this section have been published in: Keunho Lee, Kyung Il Kim, Se-Jong Kim, Dong-Woo Suh, Kyu Hwan Oh, Heung Nam Han “Observation of Micro-scale Surface …

Microstructure and Strain Analysis of Metallic Materials Using In-situ EBSD Tensile Testing and Digital Image Correlation

Se-Jong Kim Kim

Dong-Woo Suh

Kyu Hwan Oh

Heung Nam Han

2022/2

Microstructure characterization of polycrystalline yttrium iron garnets (YIGs) sintered from the calcined sol-gel powder

Materials Characterization

Min-Ji Kim

Hye-Jin Ok

Youngkyun Son

Guiyoung Gu

Dong-Woo Suh

...

2022/12/1

Interplay of Nb addition and annealing temperature and its influence on microstructure and tensile properties of multiphase steel

Materials Science and Engineering: A

Ji Hoon Kim

Seokhwan Ju

Seong Hoon Kim

Jae Sang Lee

Kang-Hyun Choi

...

2022/1/26

Prediction of Retained Austenite Fraction in Quenching-and-Partitioning (Q&P) Steels Using the Gibbs Energy Balance Approach

Metals and Materials International

Seong Hoon Kim

Ji Hoon Kim

Jae Hoon Lee

Dong-Woo Suh

Jae Sang Lee

2022/9

Microstructure and tensile properties of chemically heterogeneous steel consisting of martensite and austenite

Acta Materialia

Ji Hoon Kim

Guiyoung Gu

Min-Hyeok Kwon

Minseo Koo

Eun-Young Kim

...

2022/1/15

Room temperature quenching and partitioning (RT-Q&P) processed steel with chemically heterogeneous initial microstructure

Materials Science and Engineering: A

Guiyoung Gu

Ji Hoon Kim

Ho Hyeong Lee

Alireza Zargaran

Minseo Koo

...

2022/8/23

Temperature-dependent universal dislocation structures and transition of plasticity enhancing mechanisms of the Fe40Mn40Co10Cr10 high entropy alloy

International Journal of Plasticity

Jin-Kyung Kim

Ji Hoon Kim

Hyojin Park

Jin-Seob Kim

Guanghui Yang

...

2022/1/1

Effect of molybdenum on interfacial properties of titanium carbide reinforced Fe composite

Journal of Materials Science & Technology

Seungchan Cho

Junghwan Kim

Ilguk Jo

Jae Hyun Park

Jaekwang Lee

...

2022/4/30

Enhancement of ballistic performance enabled by transformation-induced plasticity in high-strength bainitic steel

Journal of Materials Science & Technology

Min Cheol Jo

Selim Kim

Dong Woo Suh

Hong Kyu Kim

Yong Jin Kim

...

2021/9/10

Tantalum and molybdenum barriers to prevent carbon diffusion in spark plasma sintered tungsten

Scripta Materialia

Nojun Kwak

Guensik Min

Yeonju Oh

Dong-Woo Suh

Hyoung Chan Kim

...

2021/4/15

Influence of Si and Al contents and isothermal treatment condition on the microstructure and tensile properties in ultra-high strength Fe-0.2 C-2.0 Mn martensite-bainite …

Korean Journal of Metals and Materials

Eung Hyuk Lee

Chang Jae Yu

Hong-Bum Lee

Ji-Hoon Kim

Dong-Woo Suh

2021/8/4

Ti-bearing lightweight steel with large high temperature ductility via thermally stable multi-phase microstructure

Materials Science and Engineering: A

Joonoh Moon

Hyo-Haeng Jo

Seong-Jun Park

Sung-Dae Kim

Tae-Ho Lee

...

2021/3/18

See List of Professors in Dong-Woo Suh University(Pohang University of Science and Technology)