Christopher Bryant Williams
Virginia Polytechnic Institute and State University
H-index: 59
North America-United States
Top articles of Christopher Bryant Williams
Title | Journal | Author(s) | Publication Date |
|---|---|---|---|
Powder bed fusion additive manufacturing of ultra-high molecular weight polyethylene using a novel laser scanning strategy | Additive Manufacturing | Jackson S Bryant Michael J Bortner Christopher B Williams | 2024/1/5 |
Designing Advanced Macromolecules for Advanced Manufacturing: Balancing Reactivity, Rheology, and Resolution | Bulletin of the American Physical Society | Tim Long Christopher Williams | 2024/3/4 |
7 Chapter 7. Impact of Nucleation on the Crystallization of Isotactic Polypropylene During Powder Bed Fusion as Mimicked by Fast Scanning Calorimetry | Crystallization Behavior, Tailored Microstructure, and Structure-Property Relationships of Poly (Ether Ketone Ketone) and Polyolefins | Michelle E Pomatto Jackson S Bryant Glenn A Spiering Garrett F Godshall Michael J Bortner | 2024/2/21 |
Characterizing photopolymer resins for high-temperature vat photopolymerization | Progress in Additive Manufacturing | Viswanath Meenakshisundaram Keyton Feller Nicholas Chartrain Timothy Long Christopher Williams | 2024/2/20 |
Vat Photopolymerization of Synthetic Isoprene Rubber Latexes | ACS Applied Polymer Materials | Jianheng Wen Ren H Bean Garvit Nayyar Keyton Feller Philip J Scott | 2024/2/8 |
Improving mechanical performance in material extrusion parts via optimized toolpath planning | Additive Manufacturing | Joseph R Kubalak Nathaniel J Root Alfred L Wicks Christopher B Williams | 2024/1/25 |
Towards Development of Additive Manufacturing Material and Process Technologies to Improve the Re‐Manufacturing Efficiency of Commercial Vehicle Tires | Technology Innovation for the Circular Economy: Recycling, Remanufacturing, Design, Systems Analysis and Logistics | Yiqun Fu Tadek Kosmal Ren Bean Robert Radulescu Timothy E Long | 2024/3/29 |
Workflow for layer-less multi-axis material extrusion | 2023/6/15 | ||
Toward online layer-wise surface morphology measurement in additive manufacturing using a deep learning-based approach | Journal of Intelligent Manufacturing | Chenang Liu Rongxuan Raphael Wang Ian Ho Zhenyu James Kong Christopher Williams | 2023/8 |
Impact of binder on part densification: Enhancing binder jetting part properties through the fabrication of shelled geometries | Additive Manufacturing | Kazi Moshiur Rahman Amanda Wei Hadi Miyanaji Christopher B Williams | 2023/1/25 |
Effects of binder droplet size and powder particle size on binder jetting part properties | Rapid Prototyping Journal | Kazi Moshiur Rahman Hadi Miyanaji Christopher B Williams | 2023/8/10 |
Polymers, compositions and method for manufacturing an article by 3d printing | 2023/10/26 | ||
Compositions and methods of additive manufacturing of aromatic thermoplastics and articles made therefrom | 2023/7/27 | ||
Parametric Study on the Performance of Cast Lattice Structures Loaded at Low Strain-Rates | JOM | Manuel E Umanzor Romesh C Batra Christopher B Williams Alan P Druschitz | 2023/6 |
Degradation of microcystin algal toxin by 3D printable polymer immobilized photocatalytic TiO2 | Chemical Engineering Journal | Alan J Kennedy Andrew D McQueen Mark L Ballentine Lauren R May Brianna M Fernando | 2023/1/1 |
A rheological method to predict printability of high solids content inks via ultraviolet-assisted material extrusion | Additive Manufacturing | John P Reynolds Daniel A Rau Christopher B Williams Michael J Bortner | 2023/8/5 |
Curing characteristics of a photopolymer resin with dispersed glass microspheres in vat polymerization 3D printing | ACS Applied Polymer Materials | Jingyu Liang Mathieu Francoeur Christopher Bryant Williams Bart Raeymaekers | 2023/10/11 |
Autonomous fabrication of mechatronic systems | 2023/12/14 | ||
Process-structure-property effects of ultraviolet curing in multi-material jetting additive manufacturing | Additive Manufacturing | LB Bezek CB Williams | 2023 |
Photocurable polymer compositions | 2023/5/18 |
Co-Authors
