Ali Ercetin
Bingöl Üniversitesi
H-index: 11
Asia-Turkey
Top articles of Ali Ercetin
Effect of cutting conditions on tool wear and wear mechanism in micro-milling of additively manufactured titanium alloy
Tribology International
2024/5/1
Investigation of a Hybridized Cascade Trigeneration Cycle Combined with a District Heating and Air Conditioning System Using Vapour Absorption Refrigeration Cooling: Energy and …
Energies
2024/3/7
Driving Agricultural Transformation: Unraveling Key Factors Shaping IoT Adoption in Smart Farming with Empirical Insights
Sustainability
2024/3/4
State-of-the-art review of applications of image processing techniques for tool condition monitoring on conventional machining processes
2024/1
Ali Ercetin
H-Index: 3
Comparison of the Techno-Economic and Environmental Assessment of Hydrodynamic Cavitation and Mechanical Stirring Reactors for the Production of Sustainable Hevea brasiliensis …
Sustainability
2023/11/24
Experimental Investigation of Compression Ignition Engine Combustion, Performance, and Emission Characteristics of Ternary Blends with Higher Alcohols (1-Heptanol and n-Octanol)
Energies
2023/9/13
Oguzhan Der
H-Index: 4
Ali Ercetin
H-Index: 3
Optimization of Machining Parameters to Minimize Cutting Forces and Surface Roughness in Micro-Milling of Mg13Sn Alloy
Micromachines
2023/8/12
Image Processing Approach to Investigate the Correlation between Machining Parameters and Burr Formation in Micro-Milling Processes of Selective-Laser-Melted AISI 316L
Micromachines
2023/7/5
Ali Ercetin
H-Index: 3
Effect of Drilling Parameters and Tool Geometry on the Thrust Force and Surface Roughness of Aerospace Grade Laminate Composites
Micromachines
2023/7/15
Ali Ercetin
H-Index: 3
Optimization of Micro-Drilling of Laminated Aluminum Composite Panel (Al–PE) Using Taguchi Orthogonal Array Design
Materials
2023/6/22
Oguzhan Der
H-Index: 4
Ali Ercetin
H-Index: 3
Microstructural and Mechanical Behavior Investigations of Nb-Reinforced Mg–Sn–Al–Zn–Mn Matrix Magnesium Composites
Metals
2023/6/10
Comparative Analysis of Minimum Chip Thickness, Surface Quality and Burr Formation in Micro-Milling of Wrought and Selective Laser Melted Ti64
Micromachines
2023/5/30
Powder metal Al2O3 reinforced Mg5Sn matrix composites: Production and characterization
Journal of the Faculty of Engineering and Architecture of Gazi University
2023/1/1
Ali Ercetin
H-Index: 3
Kubilay Aslantas
H-Index: 19
A Multi-Flow Production Line for Sorting of Eggs Using Image Processing
Sensors
2023
Toz metal Al2O3 takviyeli Mg5Sn matrisli kompozitler: Üretim ve karakterizasyon
Gazi Üniversitesi Mühendislik Mimarlık Fakültesi Dergisi
2023
Comparison Study of Tensile Strength Characteristics of Al2O3 reinforced Al7075 and Al6061
2022/2/21
Vijay Kumar
H-Index: 0
Ali Ercetin
H-Index: 3
METAL EKLEMELİ İMALAT İLE ÜRETİLEN 316L PASLANMAZ ÇELİĞİN MİKRO İŞLENMESİNDE KESME MESAFESİNİN ÇAPAK GENİŞLİĞİNE ETKİSİ
International Journal of 3D Printing Technologies and Digital Industry
2022
Automated Grain Counting for the Microstructure of Mg Alloys Using an Image Processing Method
Journal of Materials Engineering and Performance
2022
Ali Ercetin
H-Index: 3
Comparison of Mechanical Properties of PLA and ABS Based Structures Produced by Fused Deposition Modelling Additive Manufacturing
Avrupa Bilim ve Teknoloji Dergisi
2021/11
A novel Mg-Sn-Zn-Al-Mn magnesium alloy with superior corrosion properties
Metallurgical Research & Technology
2021/9/1
Ali Ercetin
H-Index: 3
Co-Authors
