Alberto Ortona
Scuola universitaria professionale della Svizzera italiana
H-index: 31
Europe-Switzerland
Top articles of Alberto Ortona
Title | Journal | Author(s) | Publication Date |
|---|---|---|---|
Design, additive manufacturing and electromagnetic characterization of alumina cellular structures for waveguide antenna | Advanced Engineering Materials | Alice Rosa Samuel Poretti Giacomo Milan Alberto Ortona | 2024 |
High‐strength Si–SiC lattices prepared by powder bed fusion, infiltration‐pyrolysis, and reactive silicon infiltration | Journal of the American Ceramic Society | Marco Pelanconi Samuele Bottacin Giovanni Bianchi Dietmar Koch Paolo Colombo | 2024 |
Dynamic modeling, simulation and optimization of the partially-autothermal reforming of biogas in coated monolith channels | Chemical Engineering Journal Advances | Grigorios Pantoleontos Nickolas D Vlachos Souzana Lorentzou George Karagiannakis Nikolaos I Tsongidis | 2023/11/15 |
Si-SiC oxidation barrier coating on 3D printed Si-SiC strut-based architectures deposited by electrophoretic deposition | Journal of the European Ceramic Society | Giovanni Bianchi Antonio Di Mauro Luca Ferrari Sandro Gianella Alberto Ortona | 2023/5/1 |
Liquid metal infiltration of silicon based alloys into porous carbonaceous materials Part-III: Experimental verification of conversion products and infiltration depth by … | Journal of the European Ceramic Society | Manoj Naikade Caroline Hain Kaja Kastelik Annapaola Parrilli Thomas Graule | 2023/1/1 |
Powder bed fusion of polyamide powders combined with different preceramic polymers infiltration and pyrolysis to produce complex-shaped ceramics | Journal of the European Ceramic Society | Marco Pelanconi Samuele Bottacin Paolo Colombo Alberto Ortona | 2023/11/1 |
Ceramics | Fundamentals of Biomaterials | Vasif Hasirci Nesrin Hasirci Vasif Hasirci Nesrin Hasirci | 2018 |
A preliminary investigation of gyroids made of W-Cu composite materials produced by investment casting into SiO2-based molds 3D-printed by stereolithography | Materials & Design | Davide Viganò Riccardo Balzarotti Oscar Santoliquido Alice Rosa Marco Pelanconi | 2023/10/1 |
Method for producing a CMC-component | 2023/12/26 | ||
Using zeolite filters to reduce activated carbon use in micropollutant removal from wastewater | Journal of Water Process Engineering | Maurizio Cuomo Roger König Elisabetta Zanardini Antonio Di Guardo Giovanni Bianchi | 2023/12/1 |
New, 3D binder-jetted carbons with minimal periodic surface structures | Carbon | Marco Pelanconi Pauline Blyweert Giovanni Bianchi Vincent Nicolas Davide Viganò | 2023/9/1 |
Multi-configuration evaluation of a megajoule-scale high-temperature latent thermal energy storage test-bed | Applied Thermal Engineering | Nithin Mallya Clemens Suter Selmar Binder Maurizio Barbato Alberto Ortona | 2022/9/1 |
Conceptual design of an innovative gas–gas ceramic compact heat exchanger suitable for high temperature applications | Heat and Mass Transfer | Simone A Zavattoni Luca Cornolti Riccardo Puragliesi Edoardo Arrivabeni Alberto Ortona | 2022/8/30 |
A novel device to simply 3D print bulk green ceramic components by stereolithography employing viscous slurries | Open Ceramics | Oscar Santoliquido Francesco Camerota Alice Rosa Alberto Ortona | 2021/3/1 |
Structured alumina substrates for environmental catalysis produced by stereolithography | Applied Sciences | Oscar Santoliquido Francesco Camerota Marco Pelanconi Davide Ferri Martin Elsener | 2021/9/6 |
Fabrication of dense SiSiC ceramics by a hybrid additive manufacturing process | Journal of the American Ceramic Society | Marco Pelanconi Giovanni Bianchi Paolo Colombo Alberto Ortona | 2022/2 |
Additive manufacturing of silicon carbide by selective laser sintering of PA12 powders and polymer infiltration and pyrolysis | Journal of the European Ceramic Society | Marco Pelanconi Paolo Colombo Alberto Ortona | 2021/8/1 |
Influence of pyrolysis and Silicon infiltration on the properties of CMC parts shaped by composite flow moulding | International Journal of Applied Ceramic Technology | Giovanni Bianchi Simone Vitullo Albert Vodermayer Alberto Ortona | 2021 |
Application of ceramic lattice structures to design compact, high temperature heat exchangers: material and architecture selection | Materials | Marco Pelanconi Simone Zavattoni Luca Cornolti Riccardo Puragliesi Edoardo Arrivabeni | 2021/6/11 |
3D-printed, carbon-based, lossy photonic crystals: Is high electrical conductivity the must? | Carbon | Polina Kuzhir Alesia Paddubskaya Dzmitry Bychanok Aleksandr Liubimau Alberto Ortona | 2021/1/1 |
Co-Authors
