Aamir Mubashar (Phd, CEng MIMechE)

About Aamir Mubashar (Phd, CEng MIMechE)

Aamir Mubashar (Phd, CEng MIMechE), With an exceptional h-index of 15 and a recent h-index of 14 (since 2020), a distinguished researcher at National University of Sciences and Technology, specializes in the field of Adhesive joints, composites, impact, biomechanics, machining.

His recent articles reflect a diverse array of research interests and contributions to the field:

Effect of cork powder concentration and service temperature on strength characteristics and failure modes of tubular adhesively bonded joints

Effect of hybridization on the mechanical performance and cost efficiency of carbon/flax bio‐hybrid composites

Effect of fibre hybridization and stacking sequence on the low velocity impact response of flax/basalt/aluminum composite-metal joints

A comparative study of GNPs and MWCNTs additives on dispersion behavior and strength characteristics of the adhesively bonded joints

Structural optimization of orthopedic hip implant using parametric and non-parametric optimization techniques

An experimental and simulation study of RGO effects on mechanical behaviour of structural adhesive and lap shear joints strength

Impact of solid and hollow bluff bodies on the performance and dynamics of flag-based energy harvester

The mechanical behavior of modified epoxy adhesive using GNPs, MWCNTs, and RGO nanomaterials

Aamir Mubashar (Phd, CEng MIMechE) Information

University

National University of Sciences and Technology

Position

(NUST) Islamabad Pakistan

Citations(all)

972

Citations(since 2020)

696

Cited By

492

hIndex(all)

15

hIndex(since 2020)

14

i10Index(all)

23

i10Index(since 2020)

19

Email

University Profile Page

National University of Sciences and Technology

Aamir Mubashar (Phd, CEng MIMechE) Skills & Research Interests

Adhesive joints

composites

impact

biomechanics

machining

Top articles of Aamir Mubashar (Phd, CEng MIMechE)

Title

Journal

Author(s)

Publication Date

Effect of cork powder concentration and service temperature on strength characteristics and failure modes of tubular adhesively bonded joints

Theoretical and Applied Fracture Mechanics

Hassan Ejaz

Y Muqbool

Zar Afshan

A Mubashar

2023/8/1

Effect of hybridization on the mechanical performance and cost efficiency of carbon/flax bio‐hybrid composites

Nurul Zuhairah Mahmud Zuhudi

Krishnan Jayaraman

Richard JT Lin

2020/4/23

Effect of fibre hybridization and stacking sequence on the low velocity impact response of flax/basalt/aluminum composite-metal joints

Composite Structures

Muhammad Umar bin Ashraf

Aamir Mubashar

Manzar Masud

Hassan Ejaz

Syed Hameed Hussain

...

2024/3/1

A comparative study of GNPs and MWCNTs additives on dispersion behavior and strength characteristics of the adhesively bonded joints

Journal of Dispersion Science and Technology

Hassan Ejaz

A Mubashar

Emad Uddin

Zaib Ali

2024/1/31

Structural optimization of orthopedic hip implant using parametric and non-parametric optimization techniques

Biomedical Physics & Engineering Express

Muhammad Abdullah

Aamir Mubashar

Emad Uddin

2023/8/16

An experimental and simulation study of RGO effects on mechanical behaviour of structural adhesive and lap shear joints strength

International Journal of Adhesion and Adhesives

Hassan Ejaz

A Mubashar

Emad Uddin

Zaib Ali

Nabeel Arif

...

2023/8/1

Impact of solid and hollow bluff bodies on the performance and dynamics of flag-based energy harvester

Sustainable Energy Technologies and Assessments

U Latif

MY Younis

E Uddin

Z Ali

A Mubashar

...

2023/2/1

The mechanical behavior of modified epoxy adhesive using GNPs, MWCNTs, and RGO nanomaterials

Journal of Adhesion Science and Technology

Hassan Ejaz

A Mubashar

Ahsan Tanveer

Emad Uddin

Zaib Ali

...

2023/10/20

Effect of shape on void growth: A coupled extended finite element method (XFEM) and discrete dislocation plasticity (DDP) study

European Journal of Mechanics-A/Solids

Muhammad Usman

Sana Waheed

Aamir Mubashar

2022/3/1

Effect of functionalised and non-functionalised GNPs addition on strength of viscous adhesive and shear

POLYMER TESTING

Hassan Ejaz

A Mubashar

Emad Uddin

Zaib Ali

Nabeel Arif

2022/9/1

Effect of carbon fibre on reinforcement of thermoplastics using FDM and RSM

Journal of Thermoplastic Composite Materials

F. N. Chaudhry

S. I. Butt

A. Mubashar

A. B. Naveed

S. H. Imran

...

2019

Effect of GNP and MWCNT addition on lap shear strength of adhesively bonded joints

Hassan Ejaz

Aamir Mubashar

Saad Waqar

2022/8/16

Influence of MWCNTs on strength properties of high viscous epoxy adhesive and fracture behavior of adhesively bonded joints

Theoretical and Applied Fracture Mechanics

Hassan Ejaz

A Mubashar

Emad Uddin

Zaib Ali

Nabeel Arif

2022/8/1

Effect of Temperature and Al2O3 NanoFiller on the Stress Field of CFRP/Al Adhesively Bonded Single-Lap Joints

Coatings

Muhammad Hassan

Aamir Mubashar

Manzar Masud

Amad Zafar

Muhammad Umair Ali

...

2022/11/30

Numerical investigation of hydrodynamic and hydro-acoustic performance of underwater propeller operating in off-design flow conditions

Journal of Marine Engineering & Technology

Muhammad Rehan Naseer

Emad Uddin

Aamir Mubashar

Muhmmad Sajid

Zaib Ali

...

2022/7/4

Experimental investigation of effect of welding parameters on surface roughness, micro-hardness and tensile strength of AISI 316L stainless steel welded joints using 308L …

Journal of Materials Research and Technology

Khubaib Zafar Ghumman

Sadaqat Ali

Emad Ud Din

Aamir Mubashar

Niaz Bahadur Khan

...

2022/11/1

Investigating relative density effects on quasi-static response of high-density Rigid Polyurethane Foam (RPUF)

Materials Today Communications

Naveed Iqbal

Aamir Mubashar

Sohail Ahmed

Nabeel Arif

Emad-Ud Din

2022/6/1

Design and verification of enhanced CFRTPCs fabrication technique using fused deposition modeling

Journal of Thermoplastic Composite Materials

Ali Bin Naveed

Shahid Ikramullah Butt

Aamir Mubashar

Fausz Naeem Chaudhry

Najam ul Qadir

...

2022/11

Prediction of the Ultimate Strength of Notched and Unnotched IM7/977-3 Laminated Composites Using a Micromechanics Approach

Polymers

Manzar Masud

Moosa SM Al Kharusi

Muhammad Umair Ali

Aamir Mubashar

Shaik Javeed Hussain

...

2021/10/11

An investigation of the experimental and numerical ballistic response of 12.7 mm AP tracer projectile against Al2O3/Al 5083-H116 bi-layer armour

The International Journal of Multiphysics

H Ahmed

A Mubashar

E Uddin

S Waheed Ul Haq

2021/4/19

See List of Professors in Aamir Mubashar (Phd, CEng MIMechE) University(National University of Sciences and Technology)

Aamir Mubashar (Phd, CEng MIMechE) FAQs

What is Aamir Mubashar (Phd, CEng MIMechE)'s h-index at National University of Sciences and Technology?

The h-index of Aamir Mubashar (Phd, CEng MIMechE) has been 14 since 2020 and 15 in total.

What are Aamir Mubashar (Phd, CEng MIMechE)'s top articles?

The articles with the titles of

Effect of cork powder concentration and service temperature on strength characteristics and failure modes of tubular adhesively bonded joints

Effect of hybridization on the mechanical performance and cost efficiency of carbon/flax bio‐hybrid composites

Effect of fibre hybridization and stacking sequence on the low velocity impact response of flax/basalt/aluminum composite-metal joints

A comparative study of GNPs and MWCNTs additives on dispersion behavior and strength characteristics of the adhesively bonded joints

Structural optimization of orthopedic hip implant using parametric and non-parametric optimization techniques

An experimental and simulation study of RGO effects on mechanical behaviour of structural adhesive and lap shear joints strength

Impact of solid and hollow bluff bodies on the performance and dynamics of flag-based energy harvester

The mechanical behavior of modified epoxy adhesive using GNPs, MWCNTs, and RGO nanomaterials

...

are the top articles of Aamir Mubashar (Phd, CEng MIMechE) at National University of Sciences and Technology.

What are Aamir Mubashar (Phd, CEng MIMechE)'s research interests?

The research interests of Aamir Mubashar (Phd, CEng MIMechE) are: Adhesive joints, composites, impact, biomechanics, machining

What is Aamir Mubashar (Phd, CEng MIMechE)'s total number of citations?

Aamir Mubashar (Phd, CEng MIMechE) has 972 citations in total.