Sung-Min Kim
Sungkyunkwan University
H-index: 25
Asia-South Korea
Top articles of Sung-Min Kim
An experimental study on air-oil flow patterns in horizontal pipes using two synthetic oils
International Journal of Heat and Mass Transfer
2024/7/1
Sung-Min Kim
H-Index: 18
An experimental study on pressure drop of air-oil flow in horizontal pipes using two synthetic oils
International Journal of Mechanical Sciences
2024/4/15
Sung-Hoon Kim
H-Index: 9
Sung-Min Kim
H-Index: 18
Pressure drop correlation for subcooled flow boiling in micro-channel heat sink
International Journal of Mechanical Sciences
2024/3/5
Sung-Min Kim
H-Index: 18
Thermal design limits for flow boiling of R-134a in large mini/micro-channel heat sinks with wall temperature deviation restriction
International Journal of Multiphase Flow
2024/2/27
Sung-Min Kim
H-Index: 18
Experimental investigation and analysis of two-phase flow instability of flow boiling in a mini-channel heat sink
International Journal of Heat and Mass Transfer
2023/10/1
Sung-Min Kim
H-Index: 18
Slug flow characteristics of air-liquid two-phase flow in horizontal pipes over a wide range of liquid viscosities
International Journal of Heat and Mass Transfer
2023/7/1
Sung-Min Kim
H-Index: 18
Experimental study on sub-regimes of air-water slug flow in a rectangular micro-channel
International Journal of Mechanical Sciences
2023/12/1
Santhosh Senguttuvan
H-Index: 2
Sung-Min Kim
H-Index: 18
Dryout suppression and significantly enhanced flow boiling heat transfer through the two-tier vertically aligned carbon nanotube channel
International Journal of Heat and Mass Transfer
2023/11/1
Special Issue on “CFD Based Researches and Applications for Fluid Machinery and Fluid Device, Volume II”
2023/10/20
Experimental pool boiling study on novel multistage cross-flow porous structure using FC-72 for high-heat-flux electronic applications
International Journal of Heat and Mass Transfer
2023/10/1
Sung-Min Kim
H-Index: 18
Generalized flow regime map for two-phase mini/micro-channel flows
International Journal of Heat and Mass Transfer
2022/11/1
Sung-Min Kim
H-Index: 18
Effects of manifold design parameters on flow uniformity in parallel mini-channels
International Journal of Mechanical Sciences
2022/11/15
Santhosh Senguttuvan
H-Index: 2
Sung-Min Kim
H-Index: 18
Effect of effusion hole arrangement on jet array impingement heat transfer
International Journal of Heat and Mass Transfer
2022/8/15
Sung-Min Kim
H-Index: 18
Experimental investigation of two-phase flow regimes in rectangular micro-channel with two mixer types
2022/6/17
Sung-Min Kim
H-Index: 18
Extrapolation method for reliable measurement of Seebeck coefficient of organic thin films
Organic Electronics
2022/9/1
Sein Chung
H-Index: 0
Sung-Min Kim
H-Index: 18
Kilwon Cho
H-Index: 62
Sungjoo Lee
H-Index: 29
Boseok Kang
H-Index: 25
Experimental investigation of flow and pressure drop characteristics of air-oil slug flow in a horizontal tube
International Journal of Heat and Mass Transfer
2022/2/1
Sung-Min Kim
H-Index: 18
Enhanced heat transfer in a refrigerated container using an airflow optimized refrigeration unit
International Journal of Refrigeration
2021/11/1
Machine learning algorithms to predict flow boiling pressure drop in mini/micro-channels based on universal consolidated data
International Journal of Heat and Mass Transfer
2021/10/1
Investigation of flow characteristics and eddy viscosity ratio for air-oil intermittent flow in horizontal pipe
Journal of Mechanical Science and Technology
2021/10
Santhosh Senguttuvan
H-Index: 2
Sung-Min Kim
H-Index: 18
Numerical investigation of jet array impingement cooling with effusion holes
Applied Thermal Engineering
2021/10/1
Sung-Min Kim
H-Index: 18
Co-Authors
