Roland Logé
École Polytechnique Fédérale de Lausanne
H-index: 42
Europe-Switzerland
Top articles of Roland Logé
Title | Journal | Author(s) | Publication Date |
---|---|---|---|
Healing of keyhole porosity by means of defocused laser beam remelting: Operando observation by X-ray imaging and acoustic emission-based detection | Additive Manufacturing | Charlotte de Formanoir Milad Hamidi Nasab Lucas Schlenger Steven Van Petegem Giulio Masinelli | 2024/1/5 |
Site-specifically tailored microstructures with enhanced strength and hardening through laser powder bed fusion | Materials & Design | C Sofras J Čapek X Li CC Roth C Leinenbach | 2024/1/1 |
Experimental quantification of inward Marangoni convection and its impact on keyhole threshold in laser powder bed fusion of stainless steel | Additive Manufacturing | Jian Yang Lucas Maximilian Schlenger Milad Hamidi Nasab Steven Van Petegem Federica Marone | 2024/3/25 |
EBSD study of variant reorientation, texture, and twin formation in a martensitic NiTi alloy deformed in compression | Acta Materialia | JF Xiao C Cayron Mathijs Van der Meer RE Logé | 2024/1/1 |
Dislocation Hardening in a New Manufacturing Route of Ferritic Oxide Dispersion-Strengthened Fe-14Cr Cladding Tube | Materials | Freddy Salliot András Borbély Denis Sornin Roland Logé Gabriel Spartacus | 2024/3/1 |
Quantitative prediction of crystallization in laser powder bed fusion of a Zr-based bulk metallic glass with high oxygen content | Materials & Design | Navid Sohrabi Toni Ivas Jamasp Jhabvala Jürgen EK Schawe Jörg F Löffler | 2024/2/13 |
Monitoring of laser-induced fast recrystallization in SS-316L through synchrotron X-ray diffraction | Materials & Design | Claire Navarre Steven Van Petegem Lucas Schlenger Cyril Cayron Milad Hamidi-Nasab | 2024/2/1 |
An investigation on the fatigue behavior of additively manufactured laser shock peened AlSi7Mg alloy surfaces | Materials Characterization | Milad Hamidi Nasab Maurizio Vedani Roland E Logé Navid Sohrabi Amir Mohammad Jamili | 2023/6/1 |
In-situ selective laser heat treatment for microstructural control of additively manufactured Ti-6Al-4V | Additive Manufacturing | Reza Esmaeilzadeh Milad Hamidi-Nasab Charlotte de Formanoir Lucas Schlenger Steven Van Petegem | 2023/9/25 |
Operando X-Ray imaging of stochastic inter-regime instabilities in laser melting processes: direct evidence of acoustic emission signatures | Milad Hamidi Nasab Giulio Masinelli Charlotte de Formanoir Lucas Schlenger Steven Van Petegem | 2023/2/22 | |
Postprocess treatments for surface quality improvement, mitigation of defects, and microstructural control | Charlotte de Formanoir Roland E Logé | 2023/1/1 | |
Simple shear extrusion versus equal channel angular pressing: A comparative study on the microstructure and mechanical properties of an Mg alloy | Journal of Magnesium and Alloys | A Rezaei R Mahmudi Cyril Cayron RE Logé | 2023/5/1 |
Revealing the microstructure evolution of the deformed superelastic NiTi wire by EBSD | Acta Materialia | JF Xiao C Cayron RE Logé | 2023/8/15 |
Stability of untransformed ferrite in 10Cr ODS steel | Journal of Nuclear Materials | Anthony Durand Denis Sornin Olivier Taché Thomas Guilbert François Brisset | 2023/2/1 |
Response of magnesium microcrystals to c-axis compression and contraction loadings at low and high strain rates | Acta Materialia | Nicolò Maria Della Ventura Amit Sharma Cyril Cayron Szilvia Kalácska Thomas EJ Edwards | 2023/4/15 |
Wear behaviour of novel copper alloy as an alternative to copper-beryllium | Wear | Baptiste Rouxel Stefano Mischler Roland Logé Anna Igual Munoz | 2023/7/15 |
Deformation mechanisms of primary γ′ precipitates in nickel-based superalloy | Scripta Materialia | Hongkai Zhang Hechuan Ma Tianxing Chang Yang Zhang Roland E Loge | 2023/2/1 |
Acoustic emission for the prediction of processing regimes in laser powder bed fusion, and the generation of processing maps | Additive Manufacturing | Rita Drissi-Daoudi Giulio Masinelli Charlotte de Formanoir Kilian Wasmer Jamasp Jhabvala | 2023/4/5 |
Microstructural and hardness homogeneity in an Mg–Gd− Y–Ag alloy processed by simple shear extrusion | Materials Science and Engineering: A | A Rezaei R Mahmudi RE Logé | 2023/6/15 |
Harmonizing sound and light: X-ray imaging unveils acoustic signatures of stochastic inter-regime instabilities during laser melting | Nature Communications | Milad Hamidi Nasab Giulio Masinelli Charlotte de Formanoir Lucas Schlenger Steven Van Petegem | 2023/12/5 |