Qi Chao
Deakin University
H-index: 22
Oceania-Australia
Top articles of Qi Chao
AlxCoCrFeNi high entropy alloys from metal scrap: Microstructure and mechanical properties
Journal of Alloys and Compounds
2024/3/5
In-situ control of residual stress and its distribution in a titanium alloy additively manufactured by laser powder bed fusion
Materials Characterization
2023/7/1
Effect of Particle Size Distribution on the Printing Quality and Tensile Properties of Ti-6Al-4V Alloy Produced by LPBF Process
Metals
2023/3/16
The influence of processing and texture on the grain boundary character distribution of an austenitic Ni30Fe alloy
Materials Characterization
2023/3/1
Heat treatment for metal additive manufacturing
2023/3/1
A review of boron nitride-based photocatalysts for carbon dioxide reduction
2023
Introducing C phase in additively manufactured Ti-6Al-4V: A new oxygen-stabilized face-centred cubic solid solution with improved mechanical properties
Materials Today
2022/12/1
Change of microstructure homogeneity with increasing Bi addition in extruded Mg-Bi alloys
Journal of Materials Science
2022/12
Formation of a transition V-rich structure during the α'to α+ β phase transformation process in additively manufactured Ti-6Al-4 V
Acta Materialia
2022/8/15
On the pitting behaviour of laser powder bed fusion prepared 316L stainless steel upon post-processing heat treatments
Corrosion Science
2022/4/1
Computational design of thermally stable and precipitation-hardened Al-Co-Cr-Fe-Ni-Ti high entropy alloys
Journal of Alloys and Compounds
2021/12/25
Tailoring the deformation characteristics of commercial purity titanium through hot deformation of a martensitic microstructure
Materials Science and Engineering: A
2021/10/19
Nanoparticle-mediated ultra grain refinement and reinforcement in additively manufactured titanium alloys
Additive Manufacturing
2021/10/1
The effect of post-processing heat treatment on the microstructure, residual stress and mechanical properties of selective laser melted 316L stainless steel
Materials Science and Engineering: A
2021/7/21
Introducing transformation twins in titanium alloys: an evolution of α-variants during additive manufacturing
Materials Research Letters
2021/3/4
Electrochemical studies on the effect of residual stress on the corrosion of 316L manufactured by selective laser melting
Corrosion Science
2020/3/1
A parallel version of the cellular automata static recrystallization model dedicated for high performance computing platforms–Development and verification
Computational Materials Science
2020/2/1
Qi Chao
H-Index: 13
Jiangting Wang
H-Index: 15
Gradient ultrafine-grained steel: Farbication and a realistic micromechanical modelling of deformation behavior
2020/1
Qi Chao
H-Index: 13
Peter Hodgson
H-Index: 49