Jinhua Zhou
Northwestern Polytechnical University
H-index: 10
Asia-China
Top articles of Jinhua Zhou
Determining residual stress profile induced by end milling from measured thin plate deformation
Thin-Walled Structures
2024/4/3
Predicting the Dynamic Parameters for Milling Thin-Walled Blades with a Neural Network
Journal of Manufacturing and Materials Processing
2024/2/21
Grain refinement mechanism in chip and the machined subsurface during high-speed machining of Inconel 718 alloy
Materials Characterization
2024/1/1
Jinhua Zhou
H-Index: 8
Zongyuan Wang
H-Index: 15
Enhancing Chatter Stability for Milling Thin-Walled Blades by Designing Non-Uniform Allowance
Applied Sciences
2023/12/18
Effect of Duty Cycle on Cutting Force for Ultrasonic Vibration-Assisted Milling Carbon Fiber-Reinforced Polymer Laminates
Materials
2023/11/30
Yukun Zhang
H-Index: 6
Jinhua Zhou
H-Index: 8
A modified constitutive model considering dynamic recrystallization behavior for cutting Inconel 718
Journal of Manufacturing Processes
2023/10/27
Jinhua Zhou
H-Index: 8
Zongyuan Wang
H-Index: 15
Noninterference tool orientations and maximum taper angles of conical cutters in 4-axis milling of complex channel parts
The International Journal of Advanced Manufacturing Technology
2023/8
Wenbo Zhang
H-Index: 7
Jinhua Zhou
H-Index: 8
An optimized milling force prediction method for multi-axis ball-end finish milling
Journal of Physics: Conference Series
2023/8/1
Jinhua Zhou
H-Index: 8
Hybrid prediction model for residual stress profile induced by multi-axis milling Ti-6Al-4 V titanium alloy combined finite element with experiment
The International Journal of Advanced Manufacturing Technology
2023/6
Zongyuan Wang
H-Index: 15
Jinhua Zhou
H-Index: 8
Residual stress generation and evaluation in milling: a review
2023/6
Xiaohui Jiang
H-Index: 1
Jinhua Zhou
H-Index: 8
Effects of Toolpath Parameters on Engagement Angle and Cutting Force in Ellipse-Based Trochoidal Milling of Titanium Alloy Ti-6Al-4V
Applied Sciences
2023/5/27
Correlation analysis of microstructure evolution on microhardness and residual stress for cutting Ti-6Al-4V titanium alloy
Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture
2023/5
Predicting surface residual stress for multi-axis milling of Ti-6Al-4V titanium alloy in combined simulation and experiments
Materials
2022/9/18
Zongyuan Wang
H-Index: 15
Jinhua Zhou
H-Index: 8
Hybrid prediction modeling for residual stress profile induced by multi-axis milling of Ti-6Al-4V titanium alloy combined finite element with experiment
2022/7/22
Zongyuan Wang
H-Index: 15
Jinhua Zhou
H-Index: 8
Predicting cutting force with unequal division parallel-sided shear zone model for orthogonal cutting
The International Journal of Advanced Manufacturing Technology
2020/4
Jinhua Zhou
H-Index: 8
