Jacek Pieprzyca
Politechnika Slaska
H-index: 11
Europe-Poland
Top articles of Jacek Pieprzyca
Modelling of hydrodynamic phenomena occurring in refining ladles for high-carbon Fe-Si alloys
Metalurgija
2024/4/1
Assessment of refining efficiency during the refining cycle in a foundry degassing unit in industrial conditions
Scientific Reports
2024/1/16
Modeling research on limitation of transition zone during continuous steel casting
Metalurgija
2024/1/1
Model Investigation of Argon Injection into Liquid Steel at Ladle Furnace Station with Using of Innovative Module
Materials
2023/12/18
Jacek Pieprzyca
H-Index: 8
Numerical and Physical Modeling of Liquid Steel Asymmetric Behavior during Non-Isothermal Conditions in a Two-Strand Slab Tundish—“Butterfly Effect”
Materials
2023/10/28
Jacek Pieprzyca
H-Index: 8
Research on the impact of rotor wear on the effectiveness of the aluminium refining process
Scientific Reports
2023/10/18
Computational fluid dynamics (CFD) analysis of medium flow and removal of inclusions in a two-strand tundish
Metalurgija
2023/7/3
Mariola Saternus
H-Index: 9
Jacek Pieprzyca
H-Index: 8
Optimization of the steel flow in the two-strand tundish using different geometry of impact pad
Metalurgija
2023/4/3
Impact of rotor design on its wear and work efficiency of the aluminum refining process
Metals
2022/10/24
Mariola Saternus
H-Index: 9
Jacek Pieprzyca
H-Index: 8
Using physical modeling to optimize the aluminium refining process
Materials
2022/10/21
Mariola Saternus
H-Index: 9
Jacek Pieprzyca
H-Index: 8
Physical and Numerical Modeling of the Impeller Construction Impact on the Aluminum Degassing Process
Materials
2022/7/30
Jacek Pieprzyca
H-Index: 8
The interaction of the argon curtain at the interface: Metal-slag in a tundish
Metalurgija
2022/7/1
Impact of rotor material wear on the aluminum refining process
Materials
2022/6/23
Mariola Saternus
H-Index: 9
Jacek Pieprzyca
H-Index: 8
Influence of casting rate on the mixing process of steel in non-symmetric tundish
Metalurgija
2022/4/1
Modified froude criterion in modeling two-phase flows in a steel ladle
Metalurgija
2022/1/3
Physical and numerical modeling of the slag splashing process
Materials
2021/4/28
Jacek Pieprzyca
H-Index: 8
Evolution of the numerical model describing the distribution of non-metallic inclusions in the tundish
Materials
2021/4/26
Jacek Pieprzyca
H-Index: 8
Emergency condition of the operation of a non-symmetric tundish
Metalurgija
2021/1/4
The process of dissolving solid lump carbonaceous fuel (SLCF) in the oxygen converter-physical modeling
Metalurgija
2021/7/1
Dynamiczne wyznaczanie przegrzania stali za pomocą kontrolnego pomiaru temperatury likwidusu oraz ciągłego pomiaru temperatury stali w kadzi pośredniej maszyny COS
Hutnik, Wiadomości Hutnicze
2020
Jacek Pieprzyca
H-Index: 8