Ana Pilipović
Sveucilište u Zagrebu
H-index: 13
Europe-Croatia
Top articles of Ana Pilipović
Impact of Part Positioning along Chamber Z-Axis and Processing Parameters in Selective Laser Sintering on Polyamide Properties
Applied Sciences
2024/1/23
Ana Pilipović
H-Index: 9
Petar Ilinčić
H-Index: 4
The Influence of Contemporary Denture Base Fabrication Methods on Residual Monomer Content, Flexural Strength and Microhardness
Materials
2024/2/24
Comparison of the Influence of Carbon Obtained from Kitchen Waste and Synthetic Carbon on the Tensile Properties of Polyolefins
Materials Science Forum
2023/12/22
Ana Pilipović
H-Index: 9
Influence of Ageing on Optical, Mechanical, and Thermal Properties of Agricultural Films
Polymers
2023/9/4
Zvonimir Katančić
H-Index: 10
Ana Pilipović
H-Index: 9
Optimization of Thermal Conductivity and Tensile Properties of High-Density Polyethylene by Addition of Expanded Graphite and Boron Nitride
Polymers
2023/9/4
Ana Pilipović
H-Index: 9
Tensile bond strength between different denture base materials and soft denture liners
Materials
2023/6/26
ISPITIVANJE SAVOJNE ČVRSTOĆE MATERIJALA ZA IZRADU BAZE PROTEZE
2023
Ana Pilipović
H-Index: 9
Josip Kranjčić
H-Index: 9
Influence of aging on tensile properties of agriculture films
2023
Ana Pilipović
H-Index: 9
Influence of FDM processing parameters and snack dimension on food printability
2023
Ana Pilipović
H-Index: 9
The effect of aging on the tensile force of nets for covering plantations in greenhouses
2023
Ana Pilipović
H-Index: 9
INFLUENCE OF DIFFERENT CORONAL RESTORATION TECHNIQUES ON FRACTURE RESISTANCE OF ENDODONTICALLY TREATED TOOTH.
Acta Stomatologica Croatica
2022/12/1
Plantaris tendon is valuable graft for the medial patellofemoral ligament reconstruction: A biomechanical study
The Knee
2022/10/1
Introduction to additive manufacturing
A Practical Guide to Design for Additive Manufacturing
2019
General Process Workflow in Additive Manufacturing
2022/9/13
Damir Godec
H-Index: 7
Ana Pilipović
H-Index: 9
Influence of Infill Pattern on 3D-Printed Parts Compression Strength
Tehnički glasnik
2022/6/21
Damir Godec
H-Index: 7
Ana Pilipović
H-Index: 9
Influence of atmospheric conditions on mechanical properties of polyamide with different content of recycled material in selective laser sintering
Polymers
2022/6/10
FEA analysis and optical measurement of city bus composite floor structure
European mechanical science
2022/6/6
The influence of aging on the transparency of plastic films
2022
Ana Pilipović
H-Index: 9
The influence of stacking sequence to mechanical properties of fibre reinforced polymer composites
2022
Ana Pilipović
H-Index: 9
Petar Ilinčić
H-Index: 4
Composter floor design evaluation with injection moulding process simulation
2022
Ana Pilipović
H-Index: 9
