Aleksa Milovanović
Univerzitet u Beogradu
H-index: 10
Europe-Serbia
Top articles of Aleksa Milovanović
Title | Journal | Author(s) | Publication Date |
---|---|---|---|
Layer thickness influence on impact properties of FDM printed PLA material | Procedia Structural Integrity | Aleksa Milovanović Sergiu-Valentin Galațanu Aleksandar Sedmak Liviu Marșavina Isaak Trajković | 2024/1/1 |
PRINTING ORIENTATION AND PLACE INFLUENCING THE COMPRESSIVE STRENGTH OF POLYAMID 12 SPECIMENS OBTAINED BY SLS TECHNOLOGY | STRUCTURAL INTEGRITY AND LIFE | Ivana Jevtić Jagoš Stojanović Aleksa Milovanović Isaak Trajković Miloš Milošević | 2024 |
Compressive and flexural mechanical responses of components obtained through mSLA vat photopolymerization technology | Theoretical and Applied Fracture Mechanics | Aleksa Milovanović Matteo Montanari Zorana Golubović Mihai P Mărghitaş Andrea Spagnoli | 2024/4/5 |
Comparative analysis of ABS materials mechanical properties | Procedia Structural Integrity | Zorana Golubovic Božica Bojovic Ljubiša Petrov Aleksandar Sedmak Aleksa Milovanović | 2024/1/1 |
PRINTING PARAMETER IMPACT ON PLA MATERIAL FRACTURE TOUGHNESS RESULTS | International scientific and professional conference POLITEHNIKA 2023 (Belgrade, 15th December 2023) | Aleksa Milovanović Tomáš Babinský Aleksandar Sedmak Miloš Milošević | 2023 |
Deviations Measurements of SLS PA Material at Compressive Specimens | 7th International Conference of Experimental and Numerical Investigations and New Technologies–CNN TECH 2023, The Book Of Abstracts, Zlatibor, July 04-July 07, 2023 | Ivana Jevtić Goran Mladenović Miloš Milošević Isaak Trajković Aleksa Milovanović | 2023 |
Comparative Mechanical Analysis of PLA and ABS Materials in Filament and Resin Form | Božica Bojović Zorana Golubović Ljubiša Petrov Aleksa Milovanović Aleksandar Sedmak | 2023/7/4 | |
Investigation of the tensile strength of polymer materials obtained through 3D printing technologies | International conference of experimental and numerical investigations and new technologies (2023; Zlatibor) | Marija Vasiljević Danilo Pejčić Luka Lekić Mihajlo Popović Miloš Pjević | 2023 |
The influence of printing orientation on the flexural strength of PA 12 specimens produced by SLS | Science of Sintering | Ivana Jevtić Goran Mladenović Aleksa Milovanović Isaak Trajković Marija Đurković | 2023 |
Dimensional Accuracy of Compressive Specimens Obtained by SLS Technology | Ivana Jevtić Goran Mladenović Miloš Milošević Aleksa Milovanović Milan Travica | 2023/7/4 | |
Mechanical characteristics of compressive specimens obtained by SLS technology | 2nd International Symposium on Risk Analysis and Safety of Complex Structures and Components (IRAS 2023) | Ivana Jevtić Goran Mladenović Miloš Milošević Aleksa Milovanović | 2023 |
Effect of building direction and heat treatment on mechanical properties of Inconel 939 prepared by additive manufacturing | Journal of Mechanical Science and Technology | Ivo Šulák Tomáš Babinský Alice Chlupová Aleksa Milovanović Luboš Náhlík | 2023/3 |
Numerical simulation of titanium alloy hip replacement implants behaviour under static and dynamic loads: Original scientific paper | HEMIJSKA INDUSTRIJA (Chemical Industry) | Tamara Smoljanić Aleksa Milovanović Simon Sedmak Ljubica Milović Aleksandar Sedmak | 2023/12/1 |
The influence of print orientation and print location on the mechanical characteristics of specimens obtained by SLS technology | Serbian Ceramic Society Conference-ADVANCED CERAMICS AND APPLICATION XI | Ivana Jevtić Goran Mladenović Miloš Milošević Aleksa Milovanović Isaak Trajković | 2023 |
Printing parameter optimization of PLA material concerning geometrical accuracy and tensile properties relative to FDM process productivity | Journal of Mechanical Science and Technology | Mihajlo Popović Miloš Pjević Aleksa Milovanović Goran Mladenović Miloš Milošević | 2023/2 |
Manufacturing parameter influence on FDM polypropylene tensile properties | Journal of Mechanical Science and Technology | Aleksa Milovanović Zorana Golubović Snežana Kirin Tomáš Babinský Ivo Šulák | 2023/11 |
Time-dependent behaviour of photosensitive resins in mSLA technology | International conference of experimental and numerical investigations and new technologies (2023; Zlatibor) | Aleksa Milovanović Matteo Montanari Roberto Brighenti Aleksandar Sedmak Miloš Milošević | 2023 |
Numerical simulation of fatigue crack growth in Ti-Al6-V4 hip implants under different exploitation conditions | Procedia Structural Integrity | Tamara Smoljanić Simon Sedmak Aleksa Milovanović Ljubica Milović | 2023/1/1 |
Printing orientation influence on tensile strength of PA12 specimens obtained by SLS | Journal of Mechanical Science and Technology | Ivana Jevtić Zorana Golubović Goran Mladenović Filippo Berto Aleksandar Sedmak | 2023/11 |
Generativni dizajn i primena aditivnih tehnologija u okruženju creo parametric | 43. JUPITER konferencija-Zbornik radova | Ivana Jevtić Mihajlo Popović Goran Mladenović Miloš Pjević Miloš Milošević | 2022 |