Naoki Takata
Nagoya University
H-index: 33
Asia-Japan
Top articles of Naoki Takata
Four-dimensional electrochemical impedance spectroscopy: Role of microstructure on corrosion behaviour of Al-Si alloys additive-manufactured by laser powder bed fusion
Corrosion Science
2024/5/15
Dasom Kim
H-Index: 4
Naoki Takata
H-Index: 18
Elucidating dominant flow channel size for capillary performance of open-cell porous wicks
International Journal of Heat and Mass Transfer
2024/5/15
Asuka Suzuki
H-Index: 4
Naoki Takata
H-Index: 18
Thermal stability of refined Al6 (Fe, Mn) phase formed in laser powder bed fusion process
Journal of Alloys and Compounds
2024/4/22
Effect of Cr content on thermally activated deformation in single-crystal micropillars of Fe-Cr binary alloys
Materials Science and Engineering: A
2024/4/13
Naoki Takata
H-Index: 18
Dasom Kim
H-Index: 4
Microstructural origins of high strength of Al–Si alloy manufactured by laser powder bed fusion: In-situ synchrotron radiation X-ray diffraction approach
Journal of Materials Science & Technology
2024/4/10
CALPHAD-aided design of high-strength Al-Si-Mg alloys for sufficient laser powder bed fusion processability
Journal of Alloys and Compounds
2024/3/15
Naoki Takata
H-Index: 18
Asuka Suzuki
H-Index: 4
Microstructural factors controlling crack resistance of Zn–Al–Mg alloy coatings prepared via hot-dip galvanizing process: Combined approach of in-situ SEM observation with …
Journal of Materials Research and Technology
2024/3/1
Al-Si 合金中の Si 含有量による炭素繊維/溶湯界面の化合物制御
鋳造工学
2024/2/25
Effect of low-temperature annealing on electric resistivity and mechanical anisotropy of Al-Si binary alloy fabricated by laser-powder bed fusion
Journal of Alloys and Compounds
2024/2/2
Laser-beam powder bed fusion of Al–Fe–Cu alloy to achieve high strength and thermal conductivity
Additive Manufacturing Letters
2024/2/1
Austenite reversion behavior of maraging steel additive-manufactured by laser powder bed fusion
ISIJ International
2024/1/30
Naoki Takata
H-Index: 18
Asuka Suzuki
H-Index: 4
レーザ粉末床溶融結合法のプロセスパラメータの効率的最適化に向けた Deposited Energy Density へのハッチ間隔の導入
日本金属学会誌
2024
Combustion Foaming of Porous (Al, Fe) 3Ti with L12 Ordered Structure
MATERIALS TRANSACTIONS
2024
Asuka Suzuki
H-Index: 4
Naoki Takata
H-Index: 18
Controlling the addition of solute Ti in Al-Mg-Zn-Cu-Ni alloy for enhanced high-temperature creep properties
Materials Science and Engineering: A
2024/1/1
Evaluation of reactive wetting kinetics of carbon fibers by molten Al-Ti alloy and its application to the fabrication of Al/carbon fiber composites
Journal of Alloys and Compounds
2023/12/15
Asuka Suzuki
H-Index: 4
Naoki Takata
H-Index: 18
Processability and Solidification Microstructure of Al-10Si-4.5 Mg Alloy Fabricated by Laser Powder Bed Fusion
Key Engineering Materials
2023/12/1
Naoki Takata
H-Index: 18
Asuka Suzuki
H-Index: 4
単結晶マイクロピラー圧縮試験を用いた Al-Fe 合金積層造形体の高強度支配因子の検討
軽金属
2023/11/15
Wear properties of aluminum alloys fabricated by laser powder bed fusion
Tribology International
2023/9/1
Naoki Takata
H-Index: 18
3D Impedance Analysis on Dissolution Behavior of Additive-Manufactured Al-12% Si Alloy
Electrochemical Society Meeting Abstracts 243
2023/8/28
Naoki Takata
H-Index: 18
Influence of Dislocation Substructure on Size-Dependent Strength of High-Purity Aluminum Single-Crystal Micropillars
Materials Transactions
2023/8/1
Naoki Takata
H-Index: 18
Asuka Suzuki
H-Index: 4
Co-Authors
